|
[China]
Trade Verify
Address: TaiZhong Industrial Building Ai Lian LongGang District, Shenzhen, Guangdong, China
Contact name:Jena
Shenzhen Sacon Telecom Co., Ltd |
|
Verified Suppliers
|
|
|
20dBm 3G WCDMA Mobile Phone Signal Booster 2000m2 Coverage For Europe
Descriptions:
The 3G WCDMA Mobile Phone Signal Booster Kit is the best kit for boosting cell signal in your boat or
marine craft. Eliminate dropped calls and increase data speeds with
a signal booster.
Indoor Cell Phone Signal Booster series is an ideal solution for wireless system in small/medium
businesses and home users looking to enhance indoor wireless connectivity. It is connected via coaxial
cable to Donor Antenna and Service Antenna, Donor Antenna is placed outside the building where it has
easy access to BTS signal, and the Service Antenna is placed in the building where it can extend radio
coverage to the blind area. And Automatic Gain Control (AGC) to avoid the Booster from over saturation,
therefore maintaining a high voice quality and avoid adding interference to network. With good looking &
super compact design also make it attractive. Besides, it is easy installation feature is also for individual
customers to install the booster by themselves, and it does not need much professional knowledge and
instrument.
Features:
Cost effective solution for weak signal zones, reduce drop/off calls.
Compact size, low power consumption,
easy installation, great cover.
Expansion and extending of the signal of base station.
Optimization of the quality of the signal and source
improve mobile signals for much better phone call quality and smoother data transmission.
High linear design, ALC function design, low interference to BTS.
Support any cellular devices (voice & data & video)
Wide band signal booster, or customize selective band booster.
This booster also has an automatic Level control (ALC) feature that will reduce the output power of the booster if oscillation is detected.
Extended phone battery life. (Your phone does not need to put out as much power due to improved reception.)
Advantages:
can customize the Cover Image on the Cell Phone Signal Booster,
design private styles
If there are strong input signal or severe self oscillation, ISO
LED is red.
If there are good input signal, AGC LED is green.
Specification:
| Frequency Range | Uplink | Downlink | |||
| WCDMA 2100 | 1920 - 1980MHz | 2110 - 2170MHz | |||
| Max. Gain | 70dB | 75dB | |||
| Max. Output Power | 23dBm | 20dBm | |||
| Band width | Wide Band | ||||
| Manual Gain Control | 31dB / 1dB Step | ||||
| Automatic Gain Control | >30dB | ||||
| Ripple in Band | ≤ 8dB | ||||
| Noise Figure | ≤ 6dB | ||||
| VSWR | ≤ 2.0 | ||||
| Intermodulation Products | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Spurious Emission | 9KHz~1GHz | ≤ -36dBm | |||
| 1~12.75GHz | ≤ -30dBm | ||||
| Time Delay | ≤ 1.5 μs | ||||
| Frequency stability | ≤ 0.01ppm | ||||
| MTBF | > 50000 hours | ||||
| Impedance | 50 ohm | ||||
| Power Supply | AC 90-264V,DC 9V/3A | ||||
| Power LED | Power indicator | ||||
| ISO(Alarm LED) | Red | Self oscillation or Strong input signal | |||
| Green | Normal | ||||
| Mechanical Specification | |||||
| RF Connector | N-Female | ||||
| Switch | Power Switch | ||||
| Cooling | Heatsink Convection cooling | ||||
| Humidity | < 90% | ||||
| Operating Temperature | -20°C ~ +55°C | ||||
| Environment Conditions | IP40 | ||||
| Installation Type | Wall Installation | ||||
| Size | 204mm×128mm×27mm | ||||
| Weight | < 1.5Kg | ||||
Standard Package:
AC90-264V, DC5V/3A power supply adapter 1PCS
AC power cord (EU/US/UK/SA/China standard, etc) 1PCS
Installation kit 1PCS
User manual 1PCS
Recommended Accessories:
Donor antenna: Log Periodic Antenna (9dBi,806-960/1710-2700MHz)
Service antenna: Omni Ceiling Antenna (3dBi,806-960/1710-2700MHz)
5D-FB coaxial cable with connecter (Cable length optional)
Application:
To expand signal coverage or fill signal blind area where signal is weak or unavailable.
Indoor: Hotels, Home, Basements, Shopping Malls, Offices, Parking Lots, Shop.etc.
