MJ Lighting Source Co.,ltd |
|
Main products Hot seller
5730 SMD 3 LED Module LED Strip String Light Lamp Multi Colors
Waterproof IP68 DC12V white led signs
Specifications:
Product Name | 5730 SMD 3 LED |
Product Size | 75*12*05 mm |
Voltage | DC12V |
Power | 0.8W/pc |
Working Currency | 20mA |
Bean Angle | 180° |
IP Rate | IP67 |
Working temperature | -45℃~+70℃ |
Warranty | 3 Years |
Package | 20pcs/roll |
Emitting Color | White |
Application | 5730 SMD 3 Led modules is widely used for all kinds of advertising letters,Name board, Wire bar,wall,building and stage decoration. |
Pictures:
Feature:
1.Produced with Taiwan chip. high lumen, good color purity, lower
light dissipation and long lifespan.
2.Compared with traditional lights, LED light has the advantage of
energy saving, environmental friendly, long lifespan, Stable well,
install conveniently, ect.
3.Monocolour achieve the effect of advertising signs keeping
lighting state, fullcolor string suitable for advertising sign
whose color is changed always, It makes outdoor advertising signs
board produced easily and beautiful appearance.
4.Suitable for different material board like Aluminum substrate ,
stainless steel plate,ect. install conveniently.
5.Every piece is connected with series method, If one is down, Just
need to exchange the break one. Much different from the kind that
need to exchange the whole roll string if there is only 1 pcs
gone down.
6.Flexible enough for installation, high strength, High temperature
resistance,anti ultraviolet, aging-resistant, Waterproof IP67.
Driver select and installation:
1.Total load power of the driver should not be over than 80% of the
driver rated power.
For example: Driver output:DC5V,40A, Rated power is 200W. the load power
should not be over
Than 200*80%=160W. If every pcs light is 0.8W, Then the quantity
should not be over than
160/0.1=200pcs.
2.If there is more than one driver, Pls make sure that there
is no return circuit.Otherwise the drivers will be burned out.
3.Connect ways: When connect the string with driver, pls keep the
beging and the end connected with the main wire . and main wire
must be 2.5 mm2 .
Application pictures:
LED module is widely used for all kinds of LED
channel letters,Name board, Wire bar,wall,building and stage
decoration.
Notice:
1.Pls confirm the dirver is DC12V output.
2.The wire connected with driver shouldn’t be less than 2.5 mm2,If
the quantity is big,the wire should be more thicker.
3.Pls make sure of the positive and negative of the string, usually
the negative is white.
If you have more questions, Pls contact with me:
Contact : Alice Wang
Email:ledsignage_alice@163.com
Skype:alicewang2027
Whatapp:008613534016771
Website:http://www.mjlightingled.com