Easy To Fill Smooth Auto Body Filler Carbon Fibre Reinforced Polyester Putty

Easy To Fill Quick Dry Smooth Lightweight Car Body Filler

MJ-Coat Polyester Putty

PRODUCTS

Construction and Conductive Polyester Putty. Hardener for the Polyester Putty.

PRODUCT DESCRIPTION

• High quality carbon fibre reinforced polyester putty for car repairs.
• It is recommended for filling large dents and holes in vehicles, caravans and trailers.

1. Exhibit superb adhesion to metal.
2. Large hardness with high elasticity.
3. Extremely short hardening time.
4. Very good sanding properties.

Color -grey.yellow.green .

MIXING:

• For best results, bring filler and provided hardener to room temperature (minimum temperature 68ºF).
• Knead product in pouch and hardener tube before use.
• Place a 4” diameter puddle of filler on a clean mixing surface; we recommend a non-absorbent plastic mixing board.
• Add a ribbon of cream hardener from edge-to-edge across the center of the filler puddle (puddles larger than 4” will require additional hardener); or measure hardener at 2% by weight of filler – a 100:2 ratio. Mix thoroughly with a plastic spreader, using a folding motion, until uniform color is achieved.
• At room temperature (75ºF) approximate setting time is 3-5 minutes.

SUBSTRATES AND PREPARATION

The product has very good adhesion to various substrates.

It can be applied over:

• Bare steel and aluminum after flatting and degreasing.
• Zinc coated, galvanized steel after flatting and degreasing.
• Sanded glass fibre (GFK/GRP), polyester putties, works primers and existing coatings in good condition.
• Wood substrate after flatting and degreasing. We recommend sandpaper with gradations: P80 to P120.