SGS Car Body Filler Easy To Sand Yellow Grey Quick Dry Non Shrinkable

Easy To Sand Yellow Grey Quick Dry Non-Shrinkable Car Body Filler

Description:

1. We blend microspheres with selected resins and talcs to produce an automotive body filler that is faster and easier to work, while yielding a stronger, more flexible and durable painting surface.
2. What separates MJ-Coat filler from the other lightweight brands is superior manufacturing and precise quality control, ensuring a consistent product time after time.

PRODUCT USES:

• Use for minor body work and surface imperfections (1/8” thick or less) such as sand scratches, chips, scratches and pinholes.
• Ideal for use as a finish coat over body filler.

TYPICAL SUBSTRATES:

• Non-separating formula.
• Smoother texture. Easy to work with. •
• Quicker, easier filing. •
• Good adhesion to steel, metal, aluminum, fiberglass and wood surfaces.

MIXING

1. Knead cream hardener tube thoroughly before using.
2. For a golf ball-size amount of filler, squeeze out 1+ 1/4-inch strip of hardener, or mix 3 inch diameter circle, 1/2-inch thick of filler to 3 inch strip of cream hardener.
3. Correct ratio is 2:100 by weight.
4. Mix thoroughly to uniform color on clean, nonporous surface.
5. Mix only small amounts that can be used within 3 to 4 minutes.
6. Do not add cream hardener in filler container

SURFACE PREPARATION:

1. Clean surface. Remove all dirt, oil, grease and wax with a cleaning solvent such as Grease & Silicone Remover.

2. Make sure surface is dry before repairing.

3. Use 80 – 180 grit disc to featheredge paint for good mechanical adhesion.

DRYING/SANDING TIMES

• Allow the application of filler to cure 20 to 30 minutes.
• Sand with 80 grit sand paper and featheredge with 180 grit sandpaper or finer.
• Wait 1 hour before painting.
• Drying time depends on temperature and amount of hardener used.
• Optional: Apply a very thin layer of MJ-coat Glazing & Spot Putty to fill pinholes or small imperfections if necessary.