Home Companies ZhuZhou Better Tungsten Carbide Co., Ltd

Flat Oil And Gad Drilling PDC Cutter , PDC Inserts For Roller Cone Bits

Active Member

Contact Us

[China]

Address: NO.1318,Huanghe North Road, Tianuan District,Zhuzhou City,Hunan Province,P.R.China 412000

Contact name:Linda Luo

ZhuZhou Better Tungsten Carbide Co., Ltd

Flat Oil And Gad Drilling PDC Cutter , PDC Inserts For Roller Cone Bits

Country/Region china
City & Province zhuzhou hunan
Categories Air Drills

Product Details

 

 

Flat Oil and Gad drilling PDC cutters , PDC inserts for roller cone bits

 

 

Polycrystalline Diamond Composites (PDC) cutters consist of a polycrystalline diamond layer sintered with tungsten carbide substrate under extremely high pressure and high temperature.

 

Features:

  • High compositional & structural homogeneity
  • Excellent bonding between diamond particles
  • Optimized interface between diamond and tungsten-carbide layers for excellent binding

 

Application: PDC cutter and inserts can be made into roller cone bits, and the drill bit is widely used in geothermal energy drilling, mining, water well and natural gas drilling and oil well drilling. Total depths range from 100' to 20,000'.


LIMITATIONS: Impact damage, heat damage and abrasive wear all inhibit a drill bit's performance and can occur in even the softest geological formations. However, the most difficult formation for a PDC bit to drill are extremely abrasive ones.

With PDC popularity on the rise, bit manufacturing companies are seeking new materials and design aspects to make a tougher bit without compromising ROP.

 

Specification sheet--Oil and Gas drilling PDC cutters

 

CodeD ( mm)H (mm)Diamond Height (mm)Diamond Chamfer (mm)Carbide Chamfer (mm)
191919.05±0.0519.05±0.102.0-2.50.5x45°0.5x45°
191619.05±0.0516.0±0.102.0-2.50.5x45°0.5x45°
191319.05±0.0513.2±0.102.0-2.50.5x45°0.5x45°
161615.88±0.0516.0±0.102.0-2.50.3x45°0.5x45°
161315.88±0.0313.2±0.102.0-2.50.3x45°0.5x45°
161015.88±0.0310.0±0.102.0-2.50.3x45°0.5x45°
160815.88±0.038.0±0.102.0-2.50.3x45°0.5x45°
131313.44±0.0313.2±0.102.0-2.50.3x45°0.5x45°
130813.44±0.038.0±0.102.0-2.50.3x45°0.5x45°
      


 

Design Target of T PDC Cutters

 

1. TC PDC Cutter (Flat shaped, Comprehensive products)

2. TD PDC Cutter (Flat shaped , High Wear Resistance Products)

3. TP PDC Cutter (Spherical Products)

 

To meet different drilling requirements of PDC cutters, Zzbetter had developed the third generation TC and TD PDC Cutters in the year of 2014.

 

TC PDC Cutter: Compared with TRC PDC cutter(the second generation), TC PDC cutter has improved impact- resistance more than 1 time, and the wear-resistance of TC PDC cutter declines a little(less than 20%), thermal-stability significantly increases.

 

TD PDC Cutter: Compared with TRC PDC cutter(the second generation), TD PDC cutter has improved wear-resistance 40%, impact-resistance and thermal-stability significantly increase.

 

Zzbetter TP PDC cutters are mainly used in back-up row, inner cone, gauge row of PDC bits and Rock roller bits, which can be applied for drilling hard formations and extremely hard formations.

 

We can produce different types of Spherical Products, the specifications of TP PDC cutters are from Φ5mm~Φ25mm.

 

T PDC Cutters characters and recommendations

 

ProductsCharactersRecommendation
TC seriesExcellent impact resistance and good wear resistance. TC is the products with balanced technical indexes, comprehensive performance excellent.Recommended for use in complex geological condition of vertical well section.
TD seriesExcellent wear resistance and good impact resistance. TD is the products with excellent wear resistance performance.Recommended for use in high demand for grinding of horizontal well section.
TP seriesSpherical products with excellent impact resistance and good wear resistance.Recommended for the use of PDC in kick-off section with TC or TD.

 

 

We have strict quality control system for PDC cutters, the following lab tests and analysis to make sure every piece of product are perfect when reaching to customers' hand:

  • 1. Wear Ratio Test
  • 2. VTL Test
  • 3. Impact Resistance Test(Side Impact)
  • 4. Thermal Stability Test

Your customers want a drill bit that will get the job done every time. You want a PDC cutter that’s in it for the long haul. With Zzbetter PDC cutters, you can make it happen without digging into your bottom line.

 

Hot Products

Durable Ballistic Pdc Inserts With Stable Performance At Wholesale Price 1.Description of the PDC ...
China Experianced Pdc Inserts Sales Offer Durable Pdc Inserts 1.Description of the PDC inserts As we ...
Model size 1313 flat PDC insert with great wear resistance for mining ZZbetter PDC inserts are ...
Model size 1308 flat PDC insert with great wear resistance for mining ZZbetter PDC inserts are ...
Model size 1304 PDC insert with great wear resistance for mining ZZbetter PDC inserts are mainly ...
High Impact Resistance Domed Pdc Inserts Wholesalers From Chinese Pdc Factory 1.Description of the ...