Mining Jaw Crushing Machine Stone Crusher for Primary / Secondary Crushing

Mining Jaw Crushing Machine Stone Crusher for Primary / Secondary Crushing
Jaw Crusher Introduction:
Jaw Crusher is one of the most popular stone crusher in the world, which is ideally suitable for primary and secondary crushing. The highest anti-pressure strength of crushed material is 320MPa.
Jaw Crusher is widely used in mining, metallurgy, construction, highway, railroad, chemistry industries, etc. Many models are available according to your different fineness requirements.
Jaw Crusher Structure:
Jaw crusher structure consist of main frame, eccentric shaft, big pulley, flywheel, moving jaw, side guard plate, toggle plate, toggle plate back seat, adjusting screw gap, the reset spring, fixed jaw plate and movable jaw and other components.
Jaw Crusher Working Principle:
Motor drives belt and belt pulley, makes moving jaw up and down through eccentric shaft. When the moving jaw is up, the angle between lining plate and moving jaw becomes large, and this will push moving jaw plate close to the fixed jaw plate. During this process, the material is crushed and ground, thus the crushing will be done.
When the moving jaw is down, the angle between lining plate and moving jaw becomes small, the moving jaw plate will leave the fixed jaw plate on account of the effect of pulling bar and spring, and then the crushed material will be discharged from the lower opening of the crushing room.
With the motor continuously rotating and the material periodically crushed and discharged by the crusher, the mass production can be realized.
Technical parameters:

Jaw Crusher Manufacturing in Our Factory: