Active Member
|
[China]
Address: 6# Xueyuan Road, Mazhai Industrial Zone, Erqi District, Zhengzhou, Henan, China.
Contact name:Calvin Cui
Zhengzhou Zhongding Heavy Duty Machine Manufacturing Co., Ltd |
|
|
Ceramic Liner Ball Mill / Super Fine Grinding Mill for Feldspar
Feeding Size 25mm
Introduction of Ceramic Ball Mill:
Ceramic Ball Mill works in both dry and wet methods intermittently
to mill, mix and discharge materials such as feldspar, quartz and
clay. The slurry can pass through 1000 sieve pore. It's a kind of
super fine grinding mill, so the feed material should be in medium
size to get best grinding efficiency and economic profit.
Advantages of Ceramic Ball Mill
This ceramic ball mill changes the intrinsic grinding mill
structure. Its body and ground plank are an integral whole. So when
fixing, it can be lowered on a plane surface once only. Use double
tiered roller axletree with centripetal spherical surface as the
support of the host axletree can reduce energy cost by 30%. The
intrinsic grille pattern forcing evacuation is instead by over fall
pattern controlling one. This can improve the milling of the
granule and the quantity dealt.
Technical Data:
| Model | Shell rotation speed(r/min) | Ball load(t) | Feeding size(mm) | Discharging size(mm) | Capacity | Motor power(kw) | Weight(t) |
| (t/h) | |||||||
| 900×1800 | 36~38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 5.5 |
| 900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 6.7 |
| 1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
| 1200×3000 | 36 | 3.5 | ≤25 | 0.074-0.4 | 1.6-5 | 37 | 12.8 |
| 1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
| 1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 16.8 |
| 1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
| 1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 25.8 |
| 1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 29 |
| 1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 35.5 |
| 1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 43 |
| 1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 43.8 |
| 2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34.8 |
| 2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 245 | 38 |
| 2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 280 | 56.6 |
| 2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 51.8 |
| 2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 380 | 60 |
| 2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 62 |
| 2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 64.8 |
| 2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 54 |
| 2400×4500 | 21 | 30 | ≤25 | 0.074-0.4 | 8.5-60 | 320 | 65 |
| 2700×4000 | 20.7 | 40 | ≤25 | 0.074-0.4 | 12-80 | 380 | 94 |
| 2700×4500 | 20.7 | 48 | ≤25 | 0.074-0.4 | 12-90 | 480 | 102 |
| 3200×4500 | 18 | 65 | ≤25 | 0.074-0.4 | Determined by process conditions | 800 | 137 |
| 3600×4500 | 17 | 90 | ≤25 | 0.074-0.4, | Determined by process conditions | 850 | 158 |
| 3600×6000 | 17 | 110 | ≤25 | 0.074-0.4 | Determined by process conditions | 1250 | 175 |
Case:
Turkey Customer Visited for Ball Mill
