10W 30W CRI97 CCT Dimming Shapeable Spotlight Dimmable Shaped LED
Track Light for Studio and Art Gallery
Specifications:
| Model No. | M1003K -3855 |
Power | 10W |
Luminous Flux | 650~750LM |
Ra | ≥97 |
Color Temperature | 2700-6000K |
Zoom Range | zoom 1:0.65 |
| DIP CCT Single Lamp Dimming | Support |
| Housing Color | Black White |
| Voltage | 220-240VAC |
| Driver | Tridonic |
Description:
KP series Magnetic contour spotlight (M1003K) hasequipped with our
newly developed 55° fixed-focuswide-angle optical lens and 15~36·
constant zoomoptical lens, compatible with p 38mm mini sizeradiator
and magnetic track adapter. Ultra-smallsize, excellent performance.
Cold forging integrated radiator design
A radiator made of 1070#pure aluminum and molded by molding
pressure.
It has high thermal conductivity, low-temperature differences, low
light failure, and long service life.
Thermal conductivity 226W/m.K
KP series stretching embedded contour spotlighthas equipped with
our latest developed 55 fixedfocus wide-angle optical lens and 15 ~
36constant zoom optical lens. compatible with p38mm mini size
radiator and 70mm stretchingembedded device. Ultra-small size,
excellentperformance.
Ultra-high-definition projection.
Millimeter-level precise Spot shaping, uniform illumination.
Fixed-focus / zoom lens can be switched arbitrarily (lt
trulyintegrates fixed-focus optics and zoom optics mutually.
Maximizethe optical properties of fixed-focus and zoom lens).
KP series stretching embedded contour spotlight has the features
offlexible rotation and precisely projection, supporting vertical
90°rotation and horizontal 355°rotation.
High-definition optical lens design
It is formed by a plurality of high-definition coated optical
lenses. The whole lamp has the characteristics of high luminous
efficiency, high spot uniformity, minor distortion, extensive
linear zoom range, good spot cut-off line, etc..
A new optical path specially designed for COB light sources.
Optical-grade variable aperture design
An optical diaphragm made of high-precision special material with
no
blurring and freezing.
Manual insertion and removal of the light cutting device can freely
change the shape of the spot.
Multi-layer dry damping design
The invention is a focusing device not requiring the application of
lubricating oil and has a silky feel. It is stable, reliable,
wear-resistant, resistant to high temperatures, and does not wear
off after extended use.
Rotating the device can change the sharpness of the spot.
Multi-layer dry damping design
Short stroke, considerable focal length, high short-focus and
long-focus
recognition, visible to the naked eye, linear zoom is enhanced and
more
convenient.
Rotate the device to adjust the spot size.
KP series stretching embedded contour spotlighthas equipped with
our latest developed 55 fixedfocus wide-angle optical lens and 15 ~
36constant zoom optical lens. compatible with p38mm mini size
radiator and 70mm stretchingembedded device. Ultra-small size,
excellentperformance.
Key Features:
360° Manual Rotation Design
Loosen the manual screw and turn the lens to achieve the 360°spot rotation adjustment function. Device to solve the 360° rotation of the
projection and light spot.
High-definition Optical Lens Design
It is formed by a plurality of high-definition coated optical lenses. The whole lamp has the characteristics of high luminous
efficiency, high spot uniformity, minor distortion, extensive linear zoom range, good spot cut-off line, etc. A new optical path specially designed for COB light sources.
Optical-grade Variable Aperture DesignAn optical diaphragm made of high-precision special material with no blurring and freezing. Manual insertion and removal of the
light cutting device can freely change the shape of the spot.
Multi-layer Dry DampingThe invention is a focusing device not requiring the application of lubricating oil and has a silky feel. It is stable, reliable, wear-resistant, resistant to high temperatures, and does not wear off after extended use. Rotating the device can change the sharpness of the spot.
Multi-layer Dry DampingShort stroke, considerable focal length, high short-focus and long-focus recognition, visible to the naked eye, linear zoom is enhanced and more convenient. Rotate the device to adjust the spot size.
Installation:
Adjust the aperture to the appropriate size, and facing the center
of the irradiated object, adjust the sharpness to a reasonable
degree, as shown in Figure 17.
Pull the four diaphragm sheets outward to the maximum, and then
push one by one vertically inward, to ensure that the cut square spot is smaller than the object to be illuminated, and adjust the sharpness of the aperture again until satisfactory, as
shown in Figure 18.
If the shape of the spot does not match the object to be
illuminated, first loosen the hand screw at the red mark, rotate
the blue part of the lens, adjust the edge of the spot to be
parallel to the edge of the object to be illuminated, and finally
tighten the hand screw. As shown in Figure 19, the LOGO projection
direction not matching can also be adjusted to the ideal direction
using this method.
Stretch the diaphragm sheet one by one outward until the spot size
is substantially consistent with the object, as shown in Figure 20.If you are not satisfied with the effect, it is recommended to
repeat the operation according to the above steps to bring up the spot effect you are happy with.
Applications:
Track lights are commonly used in various applications such as
retail stores, art galleries, residential lighting, hospitality
venues, offices and workspaces, and showrooms. They offer
adjustable and focused illumination, making them ideal for
highlighting products, artwork, architectural features, or creating
desired ambiance. The versatility of track lights allows for easy
repositioning and adjustments, providing flexible lighting
solutions for different environments.
FAQ:
Q1: What do you sell?
A1: We provide good quality of floodlight, high bay light,
explosion proof light, tri-proof light, downlight, and other
lighting products, as well as responsible services and reliable
after-sales warranty.
Q2: Is it OK to print my logo on led light product?
A2: Yes. We provide ODM and OEM services. Please inform us formally
before our production and confirm the design firstly based on our
sample.
Q3: How to deal with the faulty?
A3: During the guarantee period, we will send new lights with new
order for small quantity. For defective batch products, we will
repair them and resend them to you or we can discuss the solution
including re-call according to real situation.
Q4: Can I have a sample order for led light?
A4: Yes, we welcome sample order to test and check quality. One
sample or mixed samples are acceptable.
Q5: How long time to ship the goods if place an order?
A5: Usually 7 days for sample or small order,15 working days for
bulk order, but sometimes depend on the order quantity.
