Ming Feng Lighting Co.,Ltd. |
Verified Suppliers
|
|
Quick Detail:
Specifications: flat led light / 600x600 led panel / led panel
design
Model No | MF-PL-6262-36W |
Input voltage | 100-240Vac/220Vac, 50hz/60hz |
Power(watt) | 36W |
Dimension | 620*620 mm |
Color temperature | 2700K/3000K /4000K/ 5500K |
LED Chip | Epistar |
Luminous Flux (lm) | 3600LM |
CRI(Ra) | 80 |
Lifespan | ≥35000hrs |
Beam Angle | 1200 |
Material | Aluminum + PC |
Operating Temperature | -200C ~500C |
Dimmable | Y |
Certificate | CE/RoHS |
Warranty Period | 3 years |
Installation Steps :
1. Panel lights should be installed by trained electronic
technician.
2. Please check all the accessories when open the cartons.
3. The distance between the light and any flammable materials must
be more than 0.2m. The distance between the upper part of the
installed light and the ceiling must not be less than 2 cm.
Do not install into ceilings or walls that contain heat
source. The main cable must not connect with the low voltage cable
or the surface-mounted lights.
4. Guide the lights' connecting cables through the drilled hole,
and fix the surface-mounted lights with the pre-fitted clips. Make
sure that these are securely connected to the base material.
5. When laying the cables, make sure that the cables and plugs are
not subjected to any tensile or twisting forces. Do not kink
cables. Output cables should be laid separately and at a distance
from other cables.
6. After installation, connect the transformer to the mains supply
7. Proceed by connecting the wiring cables to the lights. Usually,
the brown (or black) wire is the Live wire, connect it with the
terminal marked "L". The blue wire is Naughty wire; connect it with
the terminal marked "N".
8. Use the dedicated LED drivers only, do not connect to other
loads
9. Do not remove the label of the lights and drivers.
Product pictures:
Applications:
2. Hospital , Schools