Ethereum Miner Machine , Innosilicon A10 Pro 500m 5GB 6GB
| Product Name | Innosilicon A10 pro 500m |
| memory | 5GB 6GB |
| Algorithm | EtHash |
| Hashrate | 500m |
| Power Consumption | 860W 950W |
| Also known as | ETH Miner King A10 Pro |
|---|
| Release | May 2020 |
|---|
| Size | 136 x 285 x 362mm |
|---|
| Weight | 8100g |
|---|
| Noise level | 75db |
|---|
| Fan(s) | 2 |
|---|
| Power | 860W 950W |
|---|
| Voltage | 12V |
|---|
| Interface | Ethernet |
|---|
| Memory | 5G 6G RAM |
|---|
| Temperature | 5 - 40 °C |
|---|
| Humidity | 5 - 95 % |
|---|
Innosilicon A10 PRO (5G 500M)
Innosilicon A10 Pro ETH Miner is from the Innosilicon mining EtHash
algorithm and has a maximum hash rate of 500MH/s. The power
consumption is 860W, which is considered power efficient and
friendly. It’s one of the few miners whose power consumption is
below 1000W. With power being the main concern for miners, the A10
Pro ETH Miner is a better alternative.
Most miners also refer to it as the ETH King A10 Pro, which was May
2020. Some of the mineable coins include Etherium classic,
Etherium, Musicoin, and Ubiq. Some of the mining pools to find this
platform include AntPool, Ethermine, NanoPool, Pooling, and ViaBTC.
The material that is used to create this miner is metal. The chip
Count is 342, and the noise level is set at 75db. The Innosilicon
A10 Pro ETH Miner is also a favorite due to its noise capacity.
The power of the miner is set at a maximum of 860W and uses the
Ethernet interface. The overall weight of the miner is 8.1 Kg and
has a cooling fan of 12038. Temperature levels are set at 0 to 40
degrees centigrade. Humidity levels are set at 10 to 90 percent.
Innosilicon A10 PRO (6G 500M)
Innosilicon A10 Pro ETH miner with 6G memory is an upgraded version
optimized for ETH mining, performing with a power-efficient hash
rate of 500MH/S at 950W.
Hashrate:500MH/s (±5%)
Power Consumption:950W(±10%, on wall, with 93% efficiency PSU, 25℃
temperature)
Dimensions:(L)360mm*(W)136mm*(H)282mm
Net Weight:8.6Kg
Internet connection:Ethernet
Ambient Temperature:0°C to 40°C
Please note that they are not new miners and after upgrading the
machine may not be refurbished, if you expect a high-standard
appearance, your discretion is strongly advised. Once the order is
placed, it will be deemed as an acceptance.
Notice:
Please make sure your farm use proper cooling, dust filter and 10A
AC cable to meet the proper operating condition requirements.
Humidity <75%, AC voltage 210~240V, Power supply AC input
current 10A, dust <0.5 Mg/m3.
