Production of 1200BPH semi auto 1 cavity 500ml water bottle blow
molding machine
BL-1200A Stretch Blow Molding Machine is suitable to produce different
shapes of PET/PC bottles. It can blow from 100ml to 2000ml
bottles and is widely used to produce mineral water
bottles,carbonater soft drink bottles,juice bottles,medical
botties,cosmetic and oil bottles etc.
1. Clamping part of 1200BPH semi-auto 0-2L bottle blow molding
machine:
The front and rear fixed template, the intermediate movable
template, the double toggle link mechanism, and the mold clamping
cylinder push the cylinder piston through the electromagnetic
directional control valve to drive the connecting rod toggle to
realize the mold clamping action. Because the cylinder force is
balanced with the four axes, the double toggle has two upper and
lower fulcrums
Mold clamping, so the template runs smoothly, the clamping force is
large, and the mold clamping structure design is reasonable.
2. Stretch the blowing part of 1200BPH semi-auto 0-2L bottle blow
molding machine:
It is composed of a stretch solenoid valve, a high-pressure blowing
valve, a stretch sealing cylinder, a movable sealing block, and a
blowing air storage tank. When working, the drawing cylinder piston
and the sealing cylinder piston are pushed by the electromagnetic
direction control valve to drive the drawing rod and the sealing
cylinder to fall on the closed mold. The sealing cylinder seals the
preform mouth, and the drawing rod is elastic to the heated one.
The preform is stretched longitudinally, and the gas stored in the
gas tank is blown into the preform in both directions by the
high-pressure blowing valve through the sealing cylinder.
Main parameter of 1200BPH semi-auto 0-2L bottle blow molding machine: |
Model | BL-1200A |
Container | Product material | PET,PP,PE |
| Volume | 0.1-2 |
| Theoretical output | 800-1000 |
| Preform length | 15-350 |
| Preform inner diameter | Φ5-38 |
Moulding | Max.mould plate Dimension(L x W) | 350×380 |
| Max.mould thickness | 180 |
| Clamping force | 45 |
| Mould opening stroke | 16 |
Machine size and weight | Main machine (L x W x H) | 160×60×161cm |
| Main machine weight | 500 |
| Heater (L x W x H) | 187×63×145cm |
| Heater weight | 250 |
| Power | 17.5 |