Raw Coal Coke Mineral Crusher With Double Teeth Roller

Raw Coal Coke Mineral Sizer Crushing Machine Stone Crusher Machine Roller Crusher

1. Technical specifications of screening typed double teeth-roller crusher stone crusher machine

2. Technical specifications of double-geared roller crusher stone crusher machine

3. Advantages of screening typed double teeth-roller crusher stone crusher machine

(1) The breakthrough of the classification double-toothed roller crusher in the theory of crushing makes it more compact and lighter than other crushing equipment of the same output, which reduces the investment cost.

(2) The graded double-toothed roller crusher is completely different from the traditional double-toothed roller crusher. It uses the tensile force and the shearing force to break the ore, thereby reducing the powder content and the product granularity is relatively uniform.

(3) The graded double-toothed roller crusher has a large tooth shape, and the design of the position and spacing of the broken teeth ensures that those particles smaller than the acceptable block degree can pass through the crushing section without breaking, so that the crushing power consumed is reduced. This unique Its characteristics make it have high processing capacity at low speed and low wear.

(4) When dealing with large water content and thicker materials, a sparse plate can be arranged on both sides of the crushing roller to clean the teeth to avoid sticking.

(5) The hydraulic coupling and the hardened surface reducer are used on the transmission. The fluid coupling makes the transmission smooth and provides overload protection; the hardened gear reducer has high transmission efficiency, long service life and compact structure.

4. Advantages of new double-geared roller crusher stone crusher machine

(1) compact structure, small size: using spiral cloth teeth, screening and combing of materials;

(2) Low energy consumption, the shape and size of broken teeth are designed according to the principle of shear force;

(3) Wear resistance of crushing teeth, the general service life can reach 6~10 months;

(4) not easy to plug; Crusher work, the material can be dumped in the upper part of the whole frame, the material mouth is not easy to block; The discharge mouth is also very large, almost the whole lower part of the machine is discharging broken products;

(5) Product size adjustment, the over-fine and powder shaped products, no too large particles;

(6) Low operating cost, easy to maintain, easy to repair;