Luoyang Zhongtai Industrial Co., Ltd. |
Verified Suppliers
|
|
input 300~400mm output 0.1mm minimum high productivity SAG Mill AG Mill
SAG Mill
The SAG mill also kown as medium-free grinding mill. The ore from the stope or the coarsely crushed ore can be directly fed into the mill. The biggest speciality of the SAG mill is that the crushing ratio is large, the input size of the grinding material is 300~400mm, sometimes even larger, and the output size can reach 0.1mm minimum, the crushing ratio can reach 3000~4000, and the input size of ball mill is between 20-30mm, the output size is 0-3mm.
Advantages
Simplify the crushing and grinding process; feeding particle size is 200-350mm, and after the first autogenous grinding, the product particle size reaches below a few millimeter. It is suitable for ore with high content of mud and water; small area taken, low investment.
Working principle
The SAG mill is a new type of grinding equipment that combines both
crushing and grinding functions. It uses the material itself as the
medium to crush by mutual impact and grinding. The SAG mill has two
kinds of dragging modes: variable speed and different power fixed
speed. Some SAG mills are also equipped with micro-motion devices.
In order to facilitate the maintenance, there is a
cylinder jacking device; for the large mill, in order to eliminate
the static resistance torque at the start, a modern advanced
technology such as a hydrostatic bearing is adopted to ensure the
mill can operate safely.
The wet self-grinding system consists of a SAG mill, a particle
size control operation, a secondary grinding equipment, and a
hard-to-grain-level processing facility. Usually the mineral is fed
into the mill bar at a certain ratio. The self-grinding machine can
grind the material to 0.074mm at a time, and its content accounts
for 20% to 50% of the total amount of the product. The crushing
ratio can reach 4000~5000, which is ten times higher than the ball
mill and rod mill.
Technical Parameters
Model | Diameter (mm) | Length (mm) | Feed Size (mm) | Main Motor | |||
Model | Power (kW) | Voltage (V) | Weight (t) | ||||
ZMJ4014 | 4000 | 1400 | < 350 | JR148-8 | 245 | 10000 | 75 |
ZMJ4018 | 4000 | 1800 | < 350 | JR1410-8 | 320 | 10000 | 82 |
ZMJ5518 | 5500 | 1800 | < 400 | TDMK800-36 | 800 | 10000 | 175 |
ZMJ6522 | 6500 | 2200 | < 400 | TDMK1600-40 | 1600 | 10000 | 280 |
ZMJ7525 | 7500 | 2500 | < 400 | TM2500-16 | 2500 | 10000 | 455 |
ZMJ7528 | 7500 | 2800 | < 400 | TM2500-16 | 2500 | 10000 | 465 |