|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
12VDC Slim Designed Microwave Motion Sensor Suitable for LED Panel
and Troffer Light
Specification Download:
HD028-01VR-3 12VDC Sensor With 2 DIP Switches.pdf
Features:
Parameter Table
| Operating voltage | 7-15V, 12VDC Typical |
| Operating Current | ≤30mA |
| Stand-by power | ≤0.5W |
| Output Control | PWM output 5V, high level 2kHz |
| Mode 1 | SENSOR ON |
| Mode 2 | SENSOR OFF |
| Mode 3 | 30% DIM |
| Mode 4 | TEST |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Mounting height | Ceiling Mounted≤3.5m |
| Detection range | Radius about 4M |
| Detection angle | 30°-150° |
| Operating temperature | -40°C~+80°C |
| IP rating | IP20 |
| Life time | 50,000 hours |
| Size | 78.5*21.5*11mm |
Function Performance
1. SENSOR ON
When user turns on the sensor the lamp dims to 30%, if the ambient
light reaches about 450lux or above and ignores the movements. The
lamp turns 100% on if the movement is detected and the ambient
light is under 450lux simultaneously, it will dim to 30% as the
movement is disappeared and the holdtime 20min counts out.
2. SENSOR OFF
The lamp is not controlled by the sensor, it works as a normal
lamp.
3. 30% DIM
The lamp is permanently on at 30%, ignoring motion and daylight
activity.
4. TEST
The lamp will be turn 100% on for about 5 seconds if the movement
is detected and the ambient light is under 450lux
simultaneously.
DIP Switch
Remote control
