|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
1-10V Dimming 120-277VAC Input Voltage Rod Antenna Easy Installation of the Lamp
Features:
1. Accurately identify the movement of living and non-living organisms,so that the error rate to the minimum.
2. Suitable for tri-proof light.
3. Max installation height is 2.5-4m/8.2-13.12ft.
4. When the person in the detection area,the switch always on,until the person leave the detection area.
5. Small external natural factors,stable and reliable performance.
6.1-10v dimming.
7. IP 20 with 5 years warranty.
Product Description:
| Model number | HD402V 1 |
| Operating voltage | 120-277VAC,50Hz/60Hz |
| Switching capacity | Max,3.0A@120Vac,50/60Hz; Max,2.0A@277Vac,50/60Hz |
| Stand-by power | ≤1w |
| Control method | on/off /1-10v dimming |
| Microwave frequency | 5.8GHz±75MHz |
| Microwave power | <0.3mW |
| Detection area | 10%/50%/75%/100% |
| Hold time | 5s/30s/1min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/50Lux/Disable |
| Stand-by period | 0s/10s/1min/10min/30min/60min/∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Interfaces | 7-pole pluggable clamp temminal(L,N,N,L',1-10V+,1-10V-,SNYC)for 0.75-1.5mm² cable |
| Mounting height | 2.5-4m /8.2-13.12ft |
| Deteation range | Max.ø14m/45.93ft |
| Motion detection | 0.5–1.5m/s |
| Packing method | ①the bubble pack, ②paper flat, ③outer carton(400*300*236mm)with drying agent (95pcs/carton,gross weight 8.84kg) |
| Detection angle | 30°-150° |
| Operating temperature | –20℃–+55℃ |
| IP rating | IP 20 |
| Warranty | 5 years |
ON/OFF Control Detection Area Daylight Threshold
Warranty 5 years Hold Time Stand-by period stand-by dimming level
Detection Range
This figure indicates the maximum distance at the highest mounting height with 100% sensitivity.
Typical installation height 2.5-4m.
Mechanical structure
1-10v dimming
with two installation hole for easy connect the end user lamp
12 DIP switchs set parameters which you want
Wiring diagram
Dimensions (mm)
Settings:
Detection area:
In this area,movement will be detected and able to trigger the sensor,100% detection area is also known as the strong sensitivity.
Hold time:
The period of light keeping 100% brightness after moving object leave the detection area.
Daylight threshold:
Difinition of ambient brightness;only when the ambient brightness is lower than the preset spercific LUX amount,the sensor will work;when it's perset "Disable" the sensor works everytime it detects motion regardless ambient brightness.
Stand-by period:
The period of light keeping low output before it's completely switched off,when it's preset as"∞" the light always keep at low output if no movement in the detection area and doesn't turn off.
Stand-by dimming level:
The definition of the lower output in the stand-by period.
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night. Applications: Corridor, Staircase.
With sufficient daylight,
With insufficient daylight,
After the last detection and
even when motion detected,
when motion detected, light ON. the
present hold time
light remains OFF.
elapsed, light OFF.
2. No daylight function
The daylight threshold is set to "Disable".
Light on when detect movement, After people leave, Light off after
stand-by period.
Applications: Dim places such as Basement Parking, Underpass.
When motion is detected,
After people leave the detection After the last
detection and
the sensor will switch on the
area, light remains 100%
the present hold time
light to 100% brighteness.
brightness within hold time.
elapsed, light OFF.
3. Function Demo - Dimmable control/Corridor function:
Application:
User Notes:
1.Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
2. The driver voltage shall be stable and float within 10%.
3. Detection area will be affected by speed of motion, mounting
height and movement volume.
4. Conduct test on sunny days without the lampshade which will
affect the tested lux value.
