120VAC 277VAC IP20 6m Indoor Motion Sensor For Office Corridor
Dimming Built-in Microwave Sensor for Ceiling Light with
Operating Voltage of 120-277Vac 50/60Hz
Features:
1. DIP switch setting for more options of hold time, detection area
and daylight threshold.
2. Max detection range could be 14M(Diameter).
3. Daylight sensor for more intelligently control the light based
on the natural light.
4. Built-in for ceiling light in office, corridor and parking
lot.
5. Dimming + ON/OFF options
6. Max Mounting height is 6M.
7. Different detected sensitivity for more options of detected
height.
Specification:
Operating voltage | 120~277 VAC 50/60Hz |
Switching capacity | Max.3.0A@120Vac; Max. 2.0A@277Vac |
Stand-by power | <1W |
Detection area | 10%/50%/75%/100% |
Hold time | 5s/30s/1min/5min/10min/20min/30min |
Stand-by period | 0s/10s/1min/10min/30min/1h/∞ |
Stand-by dimming level | 10%/20%/30%/50% |
Daylight threshold | 2Lux/10Lux/50Lux/Disable |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Interfaces | 6-pole pluggable clamp terminal (L,N,N,L’,1-10v+,1-10v-)for
0.75-1.5mm 2 cable |
Mounting height | Max.6m(ceiling mounted) Max.3m(wall mounted) |
Detection range | Max.ø14m(ceiling mounted) Max.20m(wall mounted) |
Operating temperature | -20°C~+55°C |
Detection angle | 30°-150° |
IP rating | IP20 |
Size | 103X45X31mm |
Certificate | UL FCC |
Function Demo :
1. Automatically ON/OFF function:
Light on when detect movement and off after people leave at night.
Applications: Corridor, Staircase.
2. 2-stage dimming function
No daylight detection ON/OFF function:
Light on when detect movement, off after people leave, day and
night.
The daylight threshold is set to "Disable". Applications: Dim
places such as Basement Parking, Underpass
3. Function Demo - Dimmable control/Corridor function
Application:
1. Suitable for indoor installation to avoid false triggering due
to external factors such as rain, wind or
tree swing.
2. Microwave can penetrate walls or glass thinner than 20cm and
attenuate if thicker than 20cm.
3. The driver voltage shall be stable and float within 10%.