|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Dimming Function Daylight Havesting Less Than 30mA DC Motion Sensor
Features of Sensor:
1. Daylight Harvesting
2. Automatic ON/OFF control Of dalight sensor.
3. Optional detection range, holdtime,daylight threshold, Stand-by period and Stand-by dimming level.
4. Remote control.
5. 5 years warranty.
Daylight harvesting of dc sensor:
Daylight Harvesting: When ambient lux value is lower than preset lux value(30Lux, 50Lux,
80Lux or 120Lux), light on when detect movement and adjust artificial lighting to
keep the brightness balancing; When ambient brightness is higher than preset lux value,
lamp will still remain off even no movement detected. | |
| Precondition of Daylight Harvesting: as picture 1. Daylight threshold is on 30Lux, 50Lux, 80Lux or 120Lux. 2. Hold time is on 5s/30s/1min/3min/5min/10min/20min/30min |
Technical date of dc motion sensor:
| Operating voltage | 10-15VDC |
| Detection area | 25%/50%/75%/100% |
| Operating current | ＜30mA |
| Output | DIM 0-10V |
| Stand-by power | <0.5W |
| Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
| Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
| Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
| Stand-by dimming level | 10%/20%/30%/50% |
| Operating termperature | -20°C~+60°C |
Application of DC motion sensor:
1. Automatically ON/OFF function:
| With sufficient daylight,even when motion detected,light remains OFF. | |
| With insufficient daylight,when motion detected, light ON. | |
| After the last detection and the present hold time elapsed, light OFF. |
2. No daylight function
| When motion is detected,the sensor will switch on thelight to 100% brighteness. | |
| After people leave the detection area, light remains 100% brightness within hold time. | |
| After the last detection and the present hold time elapsed, light OFF. |
| With sufficient daylight,even when motion detected,light remains OFF. | |
| With insufficient daylight,when motion detected, light ON. | |
| After last detection,After last detection,down to the stand-by dimming level(10%,30%) after holdtime. | |
| After the stand-by period,light OFF. |
Pattern of DC motion sensor:
| Pin setting +12v,GND,DIM+ | |
Mounting height,less than 15m/49.2ft (ceiling mounted) Detection range,Max,ø14m/45.92ft (ceiling mounted) Detection angle,30°-150° (without glass) | |
The sensor size is (L*W*H)34*33.5*11mm | |
| Antenna module:Emit microwave signal,sense the motion of the object Daylight sensor:Inducts the external light sensitivity threshold, controls the lamp switch |
