|
[China]
Trade Verify
Address: 13th Floor, C1 Building, Songshan Lake Intelligent Valley, Liaobu Town, Dongguan City, 523808, Guangdong.
Contact name:Evelyn Chow
Shenzhen HAISEN Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Wire Crystal Head DC Motion Sensor Compact Size Remote Control Setting
Wire Crystal Head Compact Size Remote Control DC Sensor For Ceiling Light
2. The output is 0-10V dimming
Mounting height | 2.5-6m/8.2-19.8ft (ceiling mounted) |
Detection range | Max.ø14m/45.92ft (ceiling mounted) |
Motion detection | 0.5~1.5m/s |
Detection angle | 30°-150°(without the glass) |
Dimmensions of DC Sensor:
1. The shell size is 51*24.4*14mm
2. White four-core wire,excluding terminal length 525mm.
Mechanical structure of DC sensor:
1. Connector:4 PIN wire crystal head
2. Installation hole:Two mounting holes for easy fixation in the
lamps
3. Daylight sensor:Strain the light intensity, convert the light
signal into electrical signal, control the switch of the lamp
4. Antenna module:Detect motion signals of objects.
5. Receive instructions from the remote control to set up parameters.
Technical date of DC sensor:
Operating voltage | 12VDC |
Operating current | 30mA±5% |
Output | 5V PWM/5V TTL |
Stand-by power | ≤0.5W |
Detection area | 25%/50%/75%/100% |
Hold time | 5s/30s/1min/3min/5min/10min/20min/30min |
Daylight threshold | 2Lux/10Lux/30Lux/50Lux/80Lux/120Lux/Disable |
Stand-by period | 0s/10s/30s/1min/5min/10min/30min/+∞ |
Stand-by dimming level | 10%/20%/30%/50% |
Microwave frequency | 5.8GHz±75MHz |
Microwave power | <0.3mW |
Operating temperature | -20°C~+55°C |
IP rating | IP20 |
Warranty | 5 years |
Factory Default Setting: Detection area 100%/ Hold time 5s/
Daylight threshold Disable/Stand-by | |
| With sufficient daylight,even when motion detected,light remains
OFF. |
| With insufficient daylight,when motion detected, light ON. |
| After the last detection and the present hold time elapsed,
light OFF. |
| When motion is detected, the sensor will switch on the light to 100% brighteness. |
| After people leave the detection area, light remains 100% brightness within hold time. |
| After the last detection and the present hold time elapsed, light OFF. |
| With sufficient daylight,even when motion detected,light remains
OFF. |
| With insufficient daylight,when motion detected, light ON. |
| After last detection, the light will be dimmed down to
the stand-by dimming level (10%,20%,30% or 50%) after holdtime. |
| After the stand-by period, light OFF. |
Features of ON/OFF Sensor:
1. Most popular DC sensor, especially for industrial lighting fixtures
2. With daylight function, offer one more option for customer except the motion sensor
3. Offer 6m mounting height, suitable for tri-proof light, linear light in warehouse, tunnel
4. HD03R/HD05R remote control, support any options needed
5. 30min hold time and +∞ stand-by period options offer the most proper mode for any applications
6. 10~ 50% stand-by dimming level offer flexible brightness needed
7.Two installation holes/rear clip-type way/double-face foam tape offer different installation method for the end-users
Installation Method of DC Sensor:
