Home Companies QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD.

Digital Retro Reflective Photoelectric Sensor High Stability Mutual Interference Prevent

QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD.
Active Member

Contact Us

[China] country

Address: YANQING ROAD XIGONGGUAN 2-1-610 JIMO QINGDAO CHINA

Contact name:MA NING

Inquir Now

QINGDAO DASS SENSOR TECHNOLOGY CO.,LTD.

Digital Retro Reflective Photoelectric Sensor High Stability Mutual Interference Prevent

Country/Region china
City & Province qingdao shandong
Categories Solar Chargers
InquireNow

Product Details

DS-G• Long sensing distance that is approximately 8 times that of our conventional model (for the Through-beam and Diffuse-reflective models).

(Through-beam: 40 m, Retro-reflective: 7 m, and Diffuse-reflective: 2.5 m.)

• Improved visibility:

• A red LED that makes the spot visible.

• Large indicators that can be seen even from a distance.

• Improved operability.

(Enlarged sensitivity adjuster and operation selector)

• Freely selectable power supply input (24 to 240 VDC, 24 to 240 VAC).

(Additional types added to the DC type lineup.)

• Models with infrared LEDs are also available.

 

 
ModelNPNDS-U81DS-U82DS-U83DS-U84DS-U85DS-U86DS-U87DS-U88
PNPDS-U81PDS-U82PDS-U83PDS-U84PDS-U85PDS-U86PDS-U87PDS-U88P
Sensing distance
(slot width)
5mm(slot width)
Sensing objectOpaque: 2 × 0.8 mm min.
Differential distance0.025mm
Light sourceGaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm
output wayN=NPN.NO.NC P=PNP.NO.NC
voltage5 to 24 VDC ±10%, ripple (p-p): 10% max.
Current consumptionAverage: 35 mA max(NPN).; Peak: 30 mA max.(PNP)
Ambient illumination1,000 lx max. with incandescent light on the surface of the receiver
Ambient temperature rangeOperating: −25 to +55°C
Storage: −30 to +80°C
Ambient humidity rangeOperating: 5% to 85%
Storage: 5% to 95%
Vibration resistanceDestruction: 20 to 2000 Hz,
1.5-mm double amplitude for 2 h each in X, Y, and Z directions
Shock resistanceDestruction: 500 m/s2 for 3 times
each in X, Y, and Z directions
Degree of protectionIEC IP50
Connecting methodPre-wired (standard cable length: 1 m)
Response frequency1 KHZ min(Average 3 KHZ)
Weight29g
Control outputNPN voltage output:
Load power supply voltage: 5 to 24 VDC
Load current: 100 mA max.
OFF current: 0.8 mA max.
100 mA load current with a residual voltage of 0.8 V max.
40 mA load current with a residual voltage of 0.4 V max,
MaterialShell material:PBT/ABS
Pervious to light part:PC

Hot Products

Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...
Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...
Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...
Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...
Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...
Photomicrosensor with built-in amplifier and attached cable reduces external light interference. • ...