Active Member
|
[China]
Address: Wuniu Industrial Zone, Yongjia, Wenzhou, Zhejiang325103, China
Contact name:Wendy Fang
Wenzhou New Blue Sky Electrical Co.,Ltd |
|
|
CJ19 Series changeover capacitor contactor is especially used for
low voltage shunt capacitor switching. And it widely used in
reactive power compensation equipment in which AC 50HZ, voltage
380V, inrush current system in the contactor can decrease shock to
capacitor and lower switching overvoltagein while breaking a
circuit.Moreover, It can replace transfer device which are composed
of one contactor and three current limiting reactors, small, light,
joins convenient and reliable, hige capacity of turning on/off.
This product conforms to GB14048.4, IEC60947-4-1 standard.
Model Explanation:
Normal Running And Installtion Conditions:
1. Ambient air temperature: -5℃+40℃. the average value should not
exceed +35℃ within 24 hours
2. Elevation: at most 2000m.
3. Atmospheric conditions: When the temperature at 40℃,the relative
humidity of atomsphere should be
at the most 50%.When at relatively low temperatures, it could have
higher relative humidity.Monthly maximum relative humidity could be
not more than 90%.Special measures should be taken due to
occurrence of dews.
4. Class of pollution:Class 3
5. Installation category: Ⅲ
6. Installation conditions: Degree of inclination between fitting
surface and vertical surface should not exceed II
7. Impact shock: Product should be installed and used in the place
where often shakes and impacts.
Structure Featrues:
Contactor is of direct action type double breakpoint structure, contact system has two layers, there are three current-limiting contacts at the first layer, together with current-limiting resistance, when it switches on, the contact will turn on after a few seconds.
CJ19-25-43 have two auxiliary contacts, CJ19-63-95 have three
auxiliary contacts.
For CJ19-25-43, Screws are available for installation, as well as
the 35mm standard din rail
For CJ19-63-95, 35mm or 75mm standard din rail can be mounted are
available for installation
Main Technical Parameter:
| Model | CJ19-25 | CJ19-32 | CJ19-43 | CJ19-63 | CJ19-80 | CJ19-95 | |
| Rated operational current(A) | 380V | 17 | 23 | 29 | 43 | 50 | 63 |
| Controllable capacity(kVar) | 230V | 6.5 | 8.5 | 10 | 20 | 21 | 23 |
| 400V | 12 | 16.7 | 20 | 32 | 38 | 42 | |
| Rated insulation voltage(V) | 690 | 690 | 690 | 690 | 690 | 690 | |
| Controlling inrush current capacity | 20In | 20In | 20In | 20In | 20In | 20In | |
| Electric fife (104 operations ) | 10 | 10 | 10 | 8 | 8 | 8 | |
| Operating characteristic | Absorbing (85%~110%)US;release (20%~75%)Us | ||||||
| Average power consumption (VA) 50Hz 20℃ | Pick-up | 76 | 110 | 110 | 230 | 230 | 230 |
| Holding | 9.4 | 11 | 11 | 32 | 32 | 32 | |
| Controllable capacity of auxiliary contact | AC-15 360VA:DC-13 33W | ||||||
| Unit weight (kg) | 0.44 | 0.6 | 0.63 | 1.33 | 1.5 | 1.5 | |
Dimensions:
CJ19 25-63
CJ19 63-95
Example: CJ19-63/21, 95/21
