|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
High torque reduction motor gearbox DC 12V motor,
The motor is a geared motor with a micro-turbine worm, and the
wiring can be changed to change the motor rotation. Worm gear motor
with self-locking, even when the motor is not charged, the output
shaft is fixed and self-locking.
No-load speed selection: 2rpm/3rpm/5rpm/6rpm/10rpm/20rpm/30rpm/40rpm/62rpm/100rpm (installation with M3 screws)
Widely used in windows, remote control curtains, micro door openers, barbecues, ovens, washing machines, garbage disposals, coffee machines, printing presses, household appliances, micro winches and other occasions.
The direction of the output shaft of the gearbox of the motor shaft is arranged vertically. The output shaft of the entire motor is relatively short relative to the general direction of the geared motor, which is widely adapted to some installation size requirements in this regard.
| Product Name | Geared stepper motor |
| Model | 35BYGH34-51PG |
| Motor Parameters | |
| Rated Voltage | 5V~12V |
| NO.OF PHASES | 2 phase |
| Gear Box Parameters | |
| Peduction Rated | 51:1 |
| STEP ANGLE | 1.8°/STEP |
| COIL RESISTANCE | 10Ω±10% |
| PHASE INDUCTANCE | 12±20% mH |
| HOLDING TORQUE | 1.2 kg.cm |
| INSULATION CLASS | B |
Mass | 0.38kg |
| OEM & ODM SERVICE | AVAILABLE |
Type of Wire Connect
Motor input method with Pin type,FPC, PCB, Lead wire etc.
These can be customized according to customer needs.
Out shaft standard as follows,also can customerized due to the user drawings
welcome to contact customer service for more types
Round Type : DIA3mm. 4mm. 5mm
D-cut Type: DIA3-D2.5 DIA4-D3 etc
Screw Type: M3 M4 M5 Serial
Trape Type
I-cut Type: DIA3-I2 DIA4-I3
Other Type: Shaft with a hole etc
The regular models are shown in the figure, and the special sizes can be customized.
Samples are packed with foam sponge inside paper box.
For mass production, products are packed in paper carton.
For sea shipping (Mass production), cartons are packed on pallet.
By express(DHL/ UPS/ Fedex/ TNT): 5~12 days
By 4PX express: 10~20 days
Sea shipping: 40~60 days (depends on different countries)
1.Are you a manufacturer or a trader?
We are the manufacturer. We manufacture the motors ourselves.
2.Where is your factory? Can we visit your factory?
Our factory is located in Changzhou, Jiangsu. If you would like to visit our factory, please feel free to visit us.
3.Do you provide customized samples/free samples?
We can customize the sample, but need additional customization cost.
No, we do not provide free samples.
4.What is the lead time for samples?
For stock samples, delivery time is 3 days.
For samples that are not in stock, the lead time is about 15 days.
For customized samples, the lead time is about 25 to 30 days.
5. What custom service do you provide?
We have a development team with over 20 years of experience.
We can provide customers with customized services for various motor parts.
From the design of the slider, lead screw and gear box of the motor.
Cable length, connector type and FPC design.
6.If we want to develop a new product, can we sign an NDA contract?
Yes, we can sign an NDA contract with you and protect your confidentiality.
If you have a new project to develop, please feel free to contact us.
