Changzhou Vic-Tech Motor Technology Co., Ltd. |
Verified Suppliers
|
|
Stepper motors are motion systems allowing to have a high
positioning precision.
With their high power already at low speed, their stall torque and
the possibility to divide the steps in micro steps,
stepper motors can provide direct and precise motions in a small
volume.
Permanent magnet and hybrid technologies are used to provide a full
range of solutions.
The absence of mechanical commutation gives to these motors a long
life time which is usually given by the sleeves
according to the load applied on the shaft.
Specifications
Model No. | Step Angle (°) | Motor Length (mm) | Current | Resistence /Phase Ω | Industance /Phase mH | Holding Torquue kg.cm | Leads No. | Detent Torque g.cm | Rotor Inertia g.cm² | Weight Kg |
---|---|---|---|---|---|---|---|---|---|---|
42HM34 | 0.9 | 34 | 1.33 | 2.1 | 4.2 | 2.2 | 4 | 200 | 35 | 0.22 |
42HM34 | 0.9 | 34 | 0.31 | 38.5 | 33 | 1.58 | 6 | 200 | 35 | 0.22 |
42HM34 | 0.9 | 34 | 0.95 | 4.2 | 4 | 1.58 | 6 | 200 | 35 | 0.22 |
42HM40 | 0.9 | 40 | 1.68 | 1.65 | 3.2 | 3.3 | 4 | 220 | 54 | 0.28 |
42HM40 | 0.9 | 40 | 0.4 | 30 | 30 | 2.59 | 6 | 220 | 54 | 0.28 |
42HM40 | 0.9 | 40 | 1.2 | 3.3 | 3.4 | 2.59 | 6 | 220 | 54 | 0.28 |
42HM48 | 0.9 | 48 | 1.68 | 1.65 | 4.1 | 4.4 | 4 | 250 | 68 | 0.38 |
42HM48 | 0.9 | 48 | 1.2 | 3.3 | 4 | 3.17 | 6 | 250 | 68 | 0.38 |
42HM48 | 0.9 | 48 | 0.4 | 30 | 38 | 3.17 | 6 | 250 | 68 | 0.38 |
42HS60 | 0.9 | 60 | 1.68 | 1.65 | 5 | 5.5 | 4 | 270 | 106 | 0.55 |
High quality and the best price.
Fast deliver,storage company and adequate inventory.
Near Shanghai port, the traffice is very convenient.
Torque Curve For Reference
Customization service
Motor’s design can be adjusted based on customer’s requirement
including:
Motor’s diameter: we have 6mm, 8mm, 10mm, 15mm and 20 mm diameter
motor
Coil resistance/ rated voltage: coil resistance is adjustable, and
with higher resistance, motor’s rated voltage is higher.
Bracket design/ lead screw length: if customer want the bracket to
be longer/short, with special design such as mounting holes, it’s
adjustable.
PCB + cables + connector: PCB’s design, cable length and connector
pitch are all adjustable, they can be replaced into FPC if
customers require.