|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
VSM10157G is the use of diameter 10MM micro stepper motor and 10*12
precision metal reduction gearbox combination, the reduction ratio
can be customized according to customer needs.
Motor basic step angle is 18 degrees, that is, 20 steps per turn,
plus the deceleration box deceleration effect, the final motor
rotation angle resolution can reach 0.05~6 degrees, can be used in
many requirements
Precise control of the rotating position of the field.
1:5 1:3 1:20 1:10 1:380 1:30 1:50 1:63 1:150 1:298 1:500 and so on,
the customer can according to different use torque speed
requirements to match the speed ratio, at the same time
Given the proper driving frequency of the stepper motor can reach
the determination of the speed and torque.
Intelligent Security Products
Camera Lenses
Door Locks
Wearable device
| Product Name | 10mm micro stepper motor | |||
| Model | VSM10157 | |||
| Rated Voltage | 5 V | |||
| Current Per Phase | 280mA /phase | |||
| Coil Resistance | 18Ω±7% | |||
| No. Of phase | 2 Phases | |||
| Step Angle | 18 degree | |||
| Excitation Method | 2 Phase Excitation | |||
| Drive Mode | Bipolar Drive | |||
| Pull-In Torque | More Than 5.0gf.cm At 500 pps | |||
| Pull-In Out | More Than 6.0gf.cm At 500 pps | |||
| Hoiding Torque | More Than 13.0gf.cm At 500 pps | |||
| Max. Response Frequency | More Than 1600 pps | |||
| Max. Starting Frequency | More Than 1000 pps | |||
| Insulation Class | Class E for Coils | |||
| Insulation Strength | 100V AC for One Second | |||
| Insulation Resistance | 50MΩ DC 500 V | |||
| Operating Temperature Range | -0~+55 ℃ | |||
Lead Method | FPC | |||
| Weight | 10g | |||
| OEM & ODM SERVICE | AVAILABLE | |||
Competitive Advantage
About geared stepper motors
The gear box has high precision, high efficiency and low noise,
which makes the product have good reliability.
The power input position of the stepper motor can be in the form of
FPC, FFC, PCB cable, etc.
The output shaft of the motor can adopt various output structures,
such as circular shaft, D-shaft and wire bar.
