|
[China]
Trade Verify
Address: No.28,Shunyuan Road,Xinbei Dist,Changzhou,Jiangsu,China(Mainland)
Contact name:Kangtai Lee
Changzhou Vic-Tech Motor Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
SM151613GR63 is the use of diameter 15mm micro stepper motor and 10*12 precision
metal reduction gearbox combination, the reduction ratio can be
customized according to customer needs.
All parts of the product are machined on the precision equipment,
and the advanced and reliable assembly process is adopted, so that
the product has the characteristics of high transmission
efficiency, low noise and high reliability.
Motor basic step angle is 18 degrees, that is, 20 steps per turn,
plus the deceleration box deceleration effect, the final motor
rotation angle resolution can reach 0.05~6 degrees, can be used in
many requirements.
Precise control of the rotating position of the field.
1:5 1:3 1:20 1:10 1:380 1:30 1:50 1:63 1:150 1:298 and so on, the
customer can according to different use torque speed requirements
to match the speed ratio, at the same time.
Given the proper driving frequency of the stepper motor can reach
the determination of the speed and torque.
This product gear box uses the most advanced equipment in the
international processing related parts, so the high precision, high
efficiency, low noise, and the use of reasonable and reliable
process, make the product has better reliability.
The power input part and standard stepper motor can be used as
probe structure, FPC, FFC, PCB cable and other forms.
Part of the output of the motor can be used in a variety of output
structure, such as the circular axis, D axis, and the wire rod!
| Product Name | 15mm permanent magnet stepper motor | |||
| Model | SM151613GR63 | |||
| Rated Voltage | 5.0 V | |||
| Coil Resistance | 10 Ω ± 10% | |||
| No. Of phase | 2 Phases | |||
| Step Angle | 18 degree | |||
| Hold Torque | 300 gf.cm | |||
| Insulation Class | Class E for Coils | |||
| Insulation Strength | 600 V AC for One Second | |||
| Insulation Resistance | 500 MΩ (DC 100 V) | |||
| Operating Temperature Range | -20~+70 ℃ | |||
| Weight | 15 g (Ref.) | |||
| OEM & ODM SERVICE | AVAILABLE | |||
| Motor Parameters | ||||||||||||
| Rated Voltage | 5.0 V DC | 5.0 V DC | 3.0 V DC | |||||||||
| Phase | 2 Phase | 2 Phase | 2 Phase | |||||||||
| Exciting Method | 2-2 Phase exciting/2-2 | 2-2 Phase exciting/2-2 | 2-2 Phase exciting/2-2 | |||||||||
| Step Angle | 18° | 18° | 18° | |||||||||
| Rotation | CW/CCW | CW/CCW | CW/CCW | |||||||||
| Resistance | 31.0Ω±7% | 8.3Ω±7% | 15Ω±7% | |||||||||
| Inductance | 11.0mH(Ref) | 11.0mH(Ref) | 5.0mH(Ref) | |||||||||
| Max. Starting Pulse Rate | 800PPS Min | 1300PPS Min | 700PPS Min | |||||||||
| Max. Slewing Pulse Rate | 900PPS Min | 1800PPS Min | 900PPS Min | |||||||||
| Holding Torque | 35gf-cm Min. | 35gf-cm Min. | 30gf-cm Min. | |||||||||
| Dielectric Strength | 3mA Max. | 3mA Max. | 3mA Max. | |||||||||
| Insulance Resistance | 100MΩ (Min.) | 100MΩ (Min.) | 100MΩ (Min.) | |||||||||
| Rotor Inertia | 0.05gf-cm2 (Ref) | 0.05gf-cm2 (Ref) | 0.05gf-cm2 (Ref) | |||||||||
| Insulation Class | Class F | Class F | Class F | |||||||||
| Operation Conditions | -10℃～70 , ORDINARY HUMIDITY/ ℃ , 15～80%RH(NO CONDENSATION OF MOISTURE | |||||||||||
| Storage Conditions | 40℃～70 , ORDINARY HUMIDITY/ ℃ 10～90%RH(NO CONDENSATION OF MOISTURE | |||||||||||
| With Gear Box (Typical Gear Ratio) | ||||||||||||
| Drive PPS | Out shaft speed (rpm) | Out Torque (g.cm) | ||||||||||
| 1:10 | 1:20 | 1:50 | 1:100 | 1:298 | 1:380 | 1:10 | 1:20 | 1:50 | 1:100 | 1:298 | 1:380 | |
| 200 | 60.00 | 30.00 | 12.00 | 6.00 | 2.01 | 1.58 | 160 | 320 | 800 | 1440 | 2880 | 3200 |
| 400 | 120.00 | 60.00 | 24.00 | 12.00 | 4.03 | 3.16 | 120 | 240 | 600 | 1080 | 2160 | 2400 |
| 600 | 180.00 | 90.00 | 36.00 | 18.00 | 6.04 | 4.74 | 80 | 160 | 400 | 720 | 1440 | 1600 |
| 800 | 240.00 | 120.00 | 48.00 | 24.00 | 8.05 | 6.32 | 50 | 100 | 250 | 450 | 900 | 1000 |
