Home Companies Shenzhen Secore Technology Co.,Ltd

Low Noise 850rpm DC Planetary Gear Motor 6V 12V 24V 24.4mm Reducer

Active Member

Contact Us

[China]

Address: Building 2, Chaoloft Cultural Creative Park, Liukou Community, Dalang Street, Longhua District, Shenzhen

Contact name:Enya

Shenzhen Secore Technology Co.,Ltd

Low Noise 850rpm DC Planetary Gear Motor 6V 12V 24V 24.4mm Reducer

Country/Region	china
City & Province	shenzhen

Product Details

High Speed Dual Gearboxes Dc Motor 6V 12V 24V New Upgraded Launching

Main features:

SC370 MOTOR PARAMETERS:

Model number	VOLTAGE	NO LOAD		AT MAXIMUM EFFICIENCY				STALL
	RATED	SPEED	CURRENT	SPEED	CURRENT	TORQUE	Output	TORQUE	CURRENT
	VDC	±10% r/min	A	±10% r/min	A	g.cm	W	g.cm	A
SC370-0610	6	10000	0.3	8200	1.6	70	6	390	8.5
SC370-1220	12	20000	0.4	17000	2.2	100	17.8	670	17

SC25-370-1610 GEAR MOTOR PARAMETERS:

gear ratio	4.4	9.6	21.3	35.5	46.8	78	103	171	226	378	500
no-load Speed ( rpm )	2273	1042	469	282	214	128	97	58	44	26	20
rated Torque (kg.cm )	0.1	0.3	0.6	1.1	1.4	2.3	3.1	5.1	6.8	11.3	15
rated Speed ( rpm )	1864	854	385	231	175	105	80	48	36	22	16
stall Torque ( kg.cm )	0.6	1.2	2.8	4.6	6.1	10.1	13.4	22.2	25
L length mm	18	17.5	19	21		23		25		27
weight g	85		87	92		95		97		100

This gear reduction DC motor is upgraded with double gear transmission boxes. Can replace planetary gearbox, with high bearing strength, strong rigidity, large load torque and long service life.

Dual gearboxes are better than high-cost planetary gearbox, with high energy efficiency, lower cost, and more in line with application requirements

High speed, high load torque, low noise, 5000H long service life

Motor Use Needs to know>>

1. When you use the motor, there should be no binding objects. For example, the adhesive should not flow into the bearing through the rotating shaft, which will hinder the operation of the motor.

2. The rotation of the shaft may have the opposite effect on the life of the motor. In order to extend the life, please check whether your load conforms to the regulations.

It should not be overloaded, or there are items that hinder rotation at the end of the shaft.

3. Do not store in surrounding high temperature or extreme humidity, and do not place in corrosive gas, which will reduce the effect of the motor.

4. Do not run the motor in the surrounding high temperature and humidity

5. When soldering is required on the positive and negative motor terminals of the power supply, the temperature of the soldering iron should be 340℃±40℃, and the heating time should be within 3 seconds.

6. Don't let the motor shaft get stuck. When power is supplied, the motor will overheat in a short time and its accessories might be burned.

7. Due to the lack skills of the staff, the quality of the motor cannot be guaranteed when the motor encounters the things mentioned in the manual, or the superficial judgment is obviously fault.

8. Supply the specified power and be sure that it is within the range of measurable requirements.

9. The installation of pulleys or gears should not be abnormally aggravated when pressed in

10. When installing the motor, if the screw is too long, it will cause contact between the motor itself and the rotor, which will affect the characteristics.