|
[China]
Trade Verify
Address: #11667 erhuanxi road jinan city shandong province china
Contact name:Kevin
Shandong Chuangxin Building Materials Complete Equipments Co., Ltd |
|
Verified Suppliers
|
|
|
fully automatic magnesium oxide board production line
2000 sheets larger capacity fully automatic magnesium oxide board production line
A. Project Feature:
1. The source of the production raw materials is widely with no regional restriction. The product is made of magnesia, mgcl2,fiber glass mesh, on-woven fabrics and other fillers. The board is formed one-time by the machine.
It is easy operation, low production cost, small investment and fast effectiveness.
2. The automatic mgo board production line in China has high automatic degree, simple production technology, low labor intensity and production line, and there is no noise and three-wastes (waste water, waste gas and waste residue) during production.
3. Low production energy consumption. With the influence of chemical reaction, it can meet the requirements about production technology without high temperature and high pressure.
4. It can produce according to different customers' request like size (length* width*thickness) , material .This automatic mgo board production line in China can produce boards Max length 3660mm and width is 1250mm.Thickness from 3-25mm.
B. Equipment Feature:
This automatic mgo board production line in China adopts the technology of double-drive double-roller-extruding, and the product is formed once after sizing, material feeding, spreading no-woven cloth, compounding and repressing.
fireproof mgo board production line. It runs stably with high automatic degree, the specification of its product can be adjusted arbitrarily.
The equipment actually realizes the industrial production-line of new model building wall board, and the product have even and glazed surface with high compactness.
The equipment largely reduces the labor intensity of worker and thoroughly changes many shortages of the former casting forming with upright mould or flat mould, such as large mould usage, low recycling rate, required electrical heating or steam heating, single kind of product as well as the sound insulation and heat-preserving which don’t meet the market requirements.
Packaging | |
1 | First use plastic film to wrap and cover the machine |
2 | Pack small parts in plywood box |
3 | marked with required label or shipping mark . |
4 | Use steel wire rope to fix the container ,so as to avoid to damage
because of moving |
| mgo board | fully automatic |
| capacity | sheets 2000 |
| automatic | HIGH |
| Item | Unit | Data |
| Density | g/cm3 | 0.9-1.20 |
| Flexural Strength | MPa | >9 |
| Heat Conductivity | w/m. k | <0.29 |
| Shock Resistance | kJ/mm2 | >2.0 |
| Screw Withdrawal Force | N/mm | <0.2 |
| Non-inflammability | Complying with GB8624A, inflammable |
