Precast Eps Concrete Sandwich Wall Panel Making Machine /
Production Line Fully Automatic
Chuangxin Automatic precast EPS concrete sandwich wall panel making
machine/ production line
Introduction of wall panel machine:
We are professional manufacturer of different kinds of lightweight
wall panel machines----precast hollow core wall panel machine, eps
concrete sandwich wall panel machine, ceramsite block machine,
fence wall panels made of construction waste etc. Our advantage is
that we not only make the machines, but also make the panels, so we
have rich experience.The most important part of our advantage is
not only about the machine, but also about the formulation. How to
make the best-quality panels at the lowest price according to the
materials which the customers have in their countries is our main
purpose. We can make the best formulation for our customers because
we have rich experience in this field. The materials of making this
kind of panels can be cement, fly ash, leca, perlite, eps, gypsum,
Mgo, Mgcl2/Mgso4, wood saw powder, crushed plant straws, etc.
Feature of wall panel making machine
1. Anti-earthquake with light weight: In view of its weight per
unit area is only 1/10 of red brick wall, the product has good
anti-earthquake performance. It can be used at low-rise building
and high-rise building, and it is preferred to be used at workshop
with steel frame structure. It can replace the color steel plate
with its better performance.
2. Fast and convenient operation: It can be installed by board or
combination with the dry method, and the product can be nailed,
cut, planed, drilled and stuck.
3. Low comprehensive cost: The product is made of agricultural and
industrial wastes, so the production cost is low. With the low load
of girder and short construction period, it can reduce over 20% of
engineering cost after compared with solid brick and hollow brick.
4. Energy-saving and environmental protection: The production
processing need no high temperature and high pressure. Being a
green environmental-protection energy-saving building materials,
the product has no toxicity, harm, pollution and radioactivity.
5. Increasing the usage area: Under the same condition of
heat-preserving and sound insulation, with the thinner plate, the
product can increase over 10% usage area after compared with the
same building.
6. Having the following features: fireproofing, water-proof,
anti-impact, acid & alkali resistant and anti-aging.
Specification of wall panel making machine
No. | Test Item | National standard | Wall panel testing | 1 | Compressive strength | ≥3.5MPa | ≥3.7MPa | 2 | Drying shrinkage | ≤0.6mm/m² | 0.37mm/ m² | 3 | Hanging force | ≥1000N 24hours No 0.55mm crack in 24hours | ≥1000N 24hours No 0.55mm crack in 24hours | 4 | shock resistance | without crack shocked by 30kgs sandbag five times | without crack shocked by 30kgs sandbag five times | 5 | The bending failure load | ≥1.5 times of the self weight of the wall panel | ≥2.5 times of the self weight of the wall panel | 6 | radioactivity | Inner radiation index Ira≤1.0 Outer radiation index IY≤1.3 | Inner radiation index Ira≤1.0 Outer radiation index IY≤1.3 | 7 | density | ≤90kgs/m² | ≤43kgs/m² | 8 | Air insulation of sound | ≥35dB | ≥43dB | 9 | Fire resistance limit | ≥1 h | ≥ 1h |
|