SINO ZHENG INDUSTRIAL INC. |
|
Extruding Magnesium Alloy Anode AZ31 AZ61 AZ91 ZK61 For Water Heater
Product Description
Magnesium alloy sacrificial anodes are used in oil pipelines, natural gas pipelines, underground oil tanks, oil platforms, water heaters, etc., which use the negative potential of magnesium, which is lower than that of steel. Magnesium alloy sacrificial anode features: good protection performance, easy installation, automatic operation after installation, no maintenance, no external current, low engineering cost, easy replacement, etc. Magnesium alloy anode is an ideal cathodic protection method.
According to the application requirements, produce high strength, heat resistant rare earth-Magnesium alloy extruded bars, tubes, wire rods, Welding wire and profiles set by national standard, ASTM, EN standard and autonomous development. The mechanical properties of the products are better than those set by various standards, and the products can be adjusted according to the concrete requirements of clients. The Magnesium products are used in different fields such as aerospace, rail transit, road traffic, pipeline transportation, textile machinery, 3C products, LED illumination etc.
Product Type: | Magnesium Anode |
Material | Magnesium alloy AZ31 AZ61 AZ91 ZK61 |
Differnet Kinds | Casting rod, Extruded rod, Rod with steel cap, Flexible anode rod |
Chemical Composition | Al:2.5-3.5%, Zn:0.6-1.4%,Mn:0.2-1.0%,Fe:0.005%max,,
Cu:0.01%max,Ni:0.001%max,Si:0.1%max, Other:0.3%max,Mg:Balance |
Property | Open-circuit voltage: 1.5-1.55V Close-circuit voltage:1.45-1.50V Actual capacitance: 1.105A.h/g Current efficiency: 50% min |
Steel Cap | stainless steel, galvannized, in black, coppper etc. |
Application | It mainly used in water heater,boiler,heat exchanger,water
tank,etc. It can softing water,de-dirt residual,ensure water sanitation,water
scale inhibition,protect inner tank,extend service life,etc. |
Feature | The extruded anode rod can be with or without steel core,can be
with steel cap or only with screw;the size of cap/screw can be
customilized by your specific requirements. Mainly different kinds of steel cap and screw available. |
Aplication
1. Transportation
Seat frame, armrest, small table panel, pedal, in-built profiles,
driving frame, sleeper frame work, dashboard frame work etc.
2. Electronics
Magnesium alloys have excellent thin wall casting performance. They
wall thickness of magnesium alloy die castings can reach 0.6-1.0mm,
and the die castings can remain certain strength, stiffness and
impact resistance. These performances are very consistent with
development demand of lightweight, thin short and small for laptop.
Mobile phone, digital camera, that makes the application of
magnesium alloy grow sustainably.
3. Aerospace industry
Engine shell, parts. Skin and cabin, frame, holder, wingtip,
aileron, fuel tank, gearbox, airscrew, seat, undercarriage, all
kinds of shell, siding, clapboard etc.
4. Military industry
Panzer tank vehicle, torpedo, guided missile, aircraft /
spacecraft, military electronic equipment, military statellite.
5. Medical industry
Medical device and implant material.
Specification
Type: AZ31B, ZK61M, AZ80A, AZ91D, M2M, ME20M, AZ40
Specification: Casting round bar billet(Φ3-160*3000)
Remarks: According to the requirements of sawing and heat treatment
UK Standard ZK60 WE43 Magnesium Metal Plate Small Modulus Of
Elasticity
Chemical Composition
Semi-continuous casting products of high strength, heat resistant rare earth-magnesium alloy set by National Standard, ASTM, EN standard and autonomous development. The company can produce aylindrical bars with Dia. 90-800mm and casting slabs with max working size of 1200*450mm. the grain size of part of the alloys can be controlled under 90um, and the quantity of magnesium ingots has reached or exceeded correlative standards. The products have been widely used in major industries such as forging, extrusion, rolling etc.
Alloy Element | Type | Chemical Composition% | Other elements b | ||||||||||||
Mg | Al | Zn | Mn | Ce | Zr | Si | Fe | Ca | Cu | Ni | Be | Sub-total | total | ||
MgAlZn | AZ31B | Balance | 2.5-3.5 | 0.6-1.4 | 0.1-0.2 | --- | --- | ≤0.08 | ≤0.003 | ≤0.04 | ≤0.01 | ≤0.001 | --- | ≤0.05 | ≤0.30 |
AZ40M | Balance | 3.0-4.0 | 0.2-0.8 | 0.15-0.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 | |
AZ80A | Balance | 7.8-9.2 | 0.2-0.8 | 0.12-0.5 | --- | --- | ≤0.10 | ≤0.005 | --- | ≤0.05 | ≤0.005 | --- | --- | ≤0.30 | |
AZ91D | Balance | 8.5-9.5 | 0.45-0.9 | 0.17-0.4 | --- | --- | ≤0.08 | ≤0.004 | --- | ≤0.025 | ≤0.001 | 0.0005- | ≤0.01 | ≤0.30 | |
0.003 | |||||||||||||||
MgMn | M2M | Balance | ≤0.20 | ≤0.30 | 1.3-2.5 | --- | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.20 |
MgZnZr | ZK61M | Balance | ≤0.05 | 5.0-6.0 | ≤0.10 | --- | 0.3-0.9 | ≤0.05 | ≤0.05 | --- | ≤0.05 | ≤0.005 | ≤0.01 | ≤0.01 | ≤0.30 |
MgMnRe | ME20M | Balance | ≤0.20 | ≤0.30 | 1.32-2.2 | 0.15-0.35 | --- | ≤0.10 | ≤0.05 | --- | ≤0.05 | ≤0.007 | ≤0.01 | ≤0.01 | ≤0.30 |
Our Advantages
Corrosion protection
Protect water heater, water containers of steel structure
Protect the gas pipeline in-home service polarization high
resistance electrolytes (soil and water in the steel structure)
FAQ
Q: Do you provide OEM/ODM service?
A: Yes, OEM/ODM is welcome, we have the professional R&D team.
They work for you all the time (design, tooling/mould, sample, mass
production).
Q: How can I know your company further?
A: Please leave message in website with you email or phone number,
the sales manager will send the catalogue to you by email or call
you directly.
Also welcome to visit our company!
Q: How can I get the quotation, sample, mass production?
A: Please show us the sizes/drawing of the parts you need, our
business director will show you detailed quotation with the lead
time of sample and mass production.
Q: How do you control the quality?
A: The products are produced under ISO9001 & SGS certificate.