110KV Double Circuits Hot Dip Galvanized ElectricTransmission Steel
|Steel||Yield Strength(MPa)||standard||Standard Title||Metallic element||Content|| |
|main ingredient Q345||345 for Thickness<=16|
(ASTM A572/A572M-15 ,EN10025 S355N)
|High strength low alloy structural steels||C||≤0.20|| |
(ASTM A283 Gr.B ,EN10025 S235JR)
|Carbon structural steels|| |
Pole shafts&multi-sided tubular
Cross arms&all accessories
|AWS D1.1/D1.1M:2010||Structural Welding Code-Steel|
|Welding wire||AWS D1.1/D1.1M:2010||Structural Welding Code-Steel|
|Hot dip galvanizing||Standard||Steel thickness/mm||Mean coating thickness/μm||Metallic element||Content|
|Pole shafts, cross arms&bolted on accessories||ASTM A123/A123M-15 AS/NZS 4680||>6||85||Mn||0.25%-0.40%|
|Foundation Bolts||ASTM A153/A153M-09||_____||≥ 54||S||<0.03%|
Our company mainly products various steel poles including street
lighting pole, electric power pole, traffic signal pole, flag pole,
wind power pole and microwave communication tower, etc. Also, we
can offer OEM service, and product the steel tower according to the
customer's design and requirement.
- A factory certificate issued by the factory with stamp and
signature must be provided before unloading the material in our
factory, otherwise, we have rights to refuse.
- Before putting into production, all the material must be passed the
chemical and physical analysis to make sure that they have met the
requested strength and component.
1. What is the MOQ order for your Pole?
For the distribution of steel poles, MOQ is one container. For the
transmission, pole is 1 pcs.
2. Can I use LCL container Loading?
Sure. We can load on LCL.
3. Can you supply sample poles?
Of course, we can delivery the sample poles for customers to test.
4. Can I get a lower price if I make the large order?
Of course! Cheaper prices with a large order.
5. What is the payment term?
30% as deposit in advance and 70% before delivery. Or LC at sight.
Or we can discuss with others payment term.
- Top Cap
- Base plate
- Bottom strip
- Standard hole
- Climbing rung
- Anchor bolt
- Bituminous protection
- Painted marking
- Removable ladder
- Grounding Nuts & Bolts
- Raw material test
- Welding (longitudinal )
- Dimension verify
- Flange welding
- Hole drilling
- Galvanization or powder coating or Bituminous painting
1. All of our materials are purchased from famous mill factory to
assure the quality.
2. A mill certificate issued by the mill factory with stamp and
signature must be provided before
unload the material in our factory;
3. Before putting into production, all the material must pass the
chemical and physical analysis to
make sure that they have met the requested strength
Through the efforts of the company staff, the support and
cooperation from all over the world. The company's products have
been exported to the Philippines, Malaysia, Australia, America,
Africa, Latin America, Panama, Suriname, Costa Rica, Colombia,
Jordan, Nigeria, etc. We have good export experience and with 1
container export to World per day on average.
1. We can supply the product based on clients' required drawings,
but also can supply the design for any kinds of
electric poles for customers to select.
2. Matercial : hot rolled coil from Q235 to Q460 ,ASTM573 GR65,
GR50 ,SS400, SS490,ST52-3
3. Deal: Hot dip galvanized Following ASTM A 123 or any other
standard by client required.
4. Packing: Plastic bubble, Mat &Straw Bale or following client
5. Length: within 14meters once forming( single section)
6. Thickness: from 2.5mm to 22mm
7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.
8. Easy install and maintenance.