Low Voltage Single Circuit Electric Steel Power Pole in Hot Dip
- Low Voltage Single Circult Electric Steel Power Pole in Hot Dip
- Suspension Pole , Tensile Pole , Strain Pole , Angle Pole , etc
- 10~500KV (10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV,
330KV, 500KV or Others )
- Conical, Round, Polygonal (Octagonal, Dodecagonal, Hexadecagonal,
- Hot Roll Steel Sheet Q345, GR50 which equivalent to S355JR.
- Min Yield Stree 345 Mpa
- Tensile Strength 470 Mpa ~ 630 Mpa
- 14m Once forming without joint
- 40GP, 40HQ container Length is 12m, so the poles will be or more
than 2 segments if longer than 12m.
- Welding complies with AWS D1.1 standard.
- CO2 welding or submerged arc auto methods
- No fissure, scar, overlap, layer or other defects
- Internal and external welding
- Ensure 100% complete penetration welds.
- Joint with insert mode, flange mode.
- Base plate is square/round/Polygon with slotted holes for anchor
- Hot dip galvanization in accordance with Chinese standard GB/T
13912-2002 or American standard ASTM A123.
- More than 25 years, it is according to installing environment
The Low Voltage Single Circuit Electric Steel Power Pole in Hot Dip
Galvanization was designed as customer's request. For transmission Line and
distribution network use. We have the type with burial type
or Base Plate use Anchor Bolts to Install. And exceed
12m the pole will be designed in 2 sections and connection mode use
slip joint or flange. The hot dip galvanized in accordance
with ASTM 123 and the zinc coating at least 86 microns.
The hot-dip galvanization technique could protect steel poles from
corrosion for as long as 50 years
As an alternative to the traditional wood and concrete poles, our
hot dip galvanized steel pole could be utilized to bear the
conductors and electric distribution equipment, power transmission
equipment, cables, etc.
After - Sales Service
Our staff supply excellent after service, track and get the product
information after our client got the products. We asked our client
to fill a “Survey form for Satisfaction degree from Client”. We
will solve the problems from clients in 24 hours, and we improve
the quality and working method according to clients' good
Raw material testStandard Accessories
- Top Cap
- Base plate
- Bottom strip
- Standard hole
- Climbing rung
- Anchor bolt
- Bituminous protection
- Painted marking
- Removable ladder
- Grounding Nuts & Bolts
Through the efforts of the company staff, the support and
cooperation from all over the world. The company's products have
been exported to the Philippines, Malaysia, Australia, America,
Africa, Latin America, Panama, Suriname, Costa Rica, Colombia,
Jordan, Nigeria, etc. We have good export experience and with 1
container export to World per day on average.
- Welding (longitudinal )
- Dimension verify
- Flange welding
- Hole drilling
- Galvanization or powder coating or Bituminous painting
1. All of our materials are purchased from famous mill factory
to assure the quality.
2. A mill certificate issued by the mill factory with stamp and
signature must be provided before unloading the material in our factory;
3. Before putting into production, all the material must pass the
chemical and physical analysis to make sure that they have met the requested strength and
Terms and Conditions
Term: EXW, FOB, CFR or CIF.
Ø EXW: Poles Cost
Ø FOB : Pole Cost + Land Transportation + Fee on Port
Ø CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight
Ø C I F : Pole Cost + Land Transportation + Fee on Port + Sea Freight +
2. MOQ: One 40FT Container.
3. Payment Term: Typically 30% by T/T as a deposit, balance by T/T or L/C at sight
before shipment. Other payment ways can be negotiated.
4. Delivery Time: 15 working days per container after PI/drawing/ prepayment
5. Package: Normally wrapped by plastic bags or burlap cloth at the top and
bottom, or according to clients’ requirement.
1. We can supply the product based on clients' required drawing,
but also can supply the design for any kinds of electric poles
for customers to select.
2. Matercial : hot rolled coil from Q235 to Q460 ,ASTM573 GR65,
GR50 ,SS400, SS490,ST52-3
3. Deal: Hot dip galvanized Following ASTM A 123 or any other
standard by client required.
4. Packing: Plastic bubble, Mat &Straw Bale or following client
5. Length: within 14meters once forming( single section)
6. Thickness: from 2.5mm to 22mm
7. Shape: polygonal(6-side,8side,12-side,16side) round tapered.
8. Easy install and maintenance.