Home Companies Jiangsu Baojuhe Science and Technology Co.,Ltd

Round Hot dip Galvanized Steel Tubular Pole ASTM A123 Standard flange mode

Contact Us

[China]

Trade Verify

Address: Heqiao Industrial Zone, Yixing City, Jiangsu Province. China.

Contact name:Lisa Li

Jiangsu Baojuhe Science and Technology Co.,Ltd

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Round Hot dip Galvanized Steel Tubular Pole ASTM A123 Standard flange mode

Country/Region	china
City & Province	jiangsu
Categories	Screws

Product Details

Round Hot-dip Galvanized Steel Tubular Pole, Framework Power Pole

Specification

Products	Round Hot-dip Galvanized Steel Tubular Pole, Framework Power Pole
Type	Suspension Pole, Tensile Pole, Strain Pole, Angle Pole, etc
Voltage Grade	Low Voltage Middle Voltage High Voltage. 10~500KV (10KV, 13.8KV,33KV, 35KV, 66KV, 110KV,132KV, 220KV, 230KV, 330KV, 500KV or Others )
Height	7M - 30M.
Shape	Conical, Round, Polygonal (Octagonal, Dodecagonal, Hexadecagonal, etc).
Material	Hot Roll Steel Sheet Q345, GR50 which equivalent to S355JR. Min Yield Stree 345 Mpa Tensile Strength 470 Mpa ~ 630 Mpa
Wall thickness	3 ~ 20mm
Once Forming	14m Once forming without joint 40GP, 40HQ container Length is 12m, so the poles will be or more than 2 segments if longer than 12m.
Welding	Welding complies with AWS D1.1 standard. CO2 welding or submerged arc auto methods No fissure, scar, overlap, layer or other defects Internal and external welding Ensure 100% complete penetration welds.
Joint	Joint with insert mode, flange mode.
Base plate	Base plate is square/round/Polygon with slotted holes for anchor bolts installation.
Galvanization	Hot dip galvanization in accordance with Chinese standard GB/T 13912-2002 or American standard ASTM A123.
Warranty	More than 25 years, it is according to installing environment

Description

The HDG Electrical Steel Tubular Pole was designed as customer's request. For Distribution and Transmission Line use. And with Base Plate use Anchor Bolts to Install. Sections with 2 and use flange to connect each segment. The hot dip galvanized in accordance with ASTM 123 and the zinc coating at least 86 microns.

But to design the practical poles for customers use, normally we need customers to provide us some parameter, like as the followings:

- Pole top design load
- Where is the position of the load, the distance from the top
- The wind Speed
- How will the wire distribute
- Pole type with Burial Type or Base Plate type
- The connections mode, use slip joint or flange
- and others can be furthermore discussed when needed.

Through the efforts of the company staff, the support and cooperation from all over the world. The company's products have been exported to the Philippines, Malaysia, Australia, America, Africa, Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan, Nigeria, etc. We have good export experience and with 1 container export to World per day on average.

Parameter

1. Steel materials conform to ASTM A36 with Q345 (S355JR), Q460, etc
2. Welding: Welding complies with CSA and AWS, AWS D1.1 standard. The welders have got corresponding
certificate after testing and inspection.

3. Finish: Hot-dip galvanized in accordance with ASTM A123.

4. Pole Height: ＞5M

5. Pole Shape: Conical / Round

6. Type: Straight Pole ,Tensile Pole ,Turn Pole (Double-loop corner pole, Single or double loops/circuit pole,
single or double tensile/terminal/straight pole, etc)
7. Resistant: Against earthquake of 8.8 grade. Wind speed as design.
8. Quality Standard: ISO9001:2008, AAA credit rating, etc
9. Easy install and maintenance
10. Voltage:10-550KV

Material Test:
1. All of our materials are purchased from famous mill factory to assure the quality.
2. A mill certificate issued by the mill factory with stamp and signature must be provided before unloading the material in our factory;
3. Before putting into production, all the material must pass the chemical and physical analysis to make sure that they have met the requested strength and components.

Production Process

Raw material test
Cutting
Bending
Welding (longitudinal )
Dimension verify
Flange welding
Hole drilling
Calibration
Deburr
Galvanization or powder coating or Bituminous painting
Recalibration
Packages

Best Service: -- Jiangsu Bosheng Steel Poles Co., Ltd, which always been providing
our clients with great quality products and superior Customer service.

Quick Lead Time.--We inform the client the exact delivery time when they place the order and work Hard to
ensure that all of your deadlines are met.

Unbeatable Prices-- Raw Material Cost + Produce Cost 1200 RMB/Ton

Unbeatable Quality -- We always supply good quality also leading products to all of our customers.

Brand Awareness -- We achieve a good reputation among our clients and develop long term business.

Special Offers. -- We quote first and then you compare, finally choose us!

Special support.-- we have a policy term to support our customers for products also payment.

Our Certifications

Terms and Conditions
1. Price Term: EXW, FOB, CFR or CIF.

Ø EXW: Poles Cost
Ø FOB : Pole Cost + Land Transportation + Fee on Port
Ø CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight
Ø C I F : Pole Cost + Land Transportation + Fee on Port + Sea Freight + Insurance.

2. MOQ: One 40FT Container.
3. Payment Term: Typically 30% by T/T as a deposit, balance by T/T or L/C at sight before shipment. Other
payment way can be negotiated.
4. Delivery Time: 15 working days per container after PI/drawing/ prepayment confirmed.
5. Package: Normally wrapped by plastic bags or burlap cloth at the top and bottom, or according to clients’
requirement.

After - Sales Service

Our staff supply excellent after service, track and get the product information after our client got the products. We asked our client to fill a “Survey form for Satisfaction degree from Client”. We will solve the problems from clients in 24 hours, and we improve the quality and working method according to client’s good suggestions.