Round Shape Electric Distribution Steel Utility Tubular Pole for 6M
- 20M Power Line
Through the efforts of the company staff, the support and
cooperation from all over the world. The company's products have
been exported to Philippines, Malaysia, Australia, America, Africa,
Latin America, Panama, Suriname, Costa Rica, Colombia, Jordan,
Nigeria, etc. We have good export experience and with 1 container
export to World in average every day.
1) Steel materials conform to ASTM A36 with
2) Welding: Welding complies with CSA and AWS, AWS D1.1 standard.
3) Finish: Hot-dip galvanized in accordance with ASTM A123. Min
Zinc Coating 86 microns.
4) Pole Height: Transmission pole ≥ 15M
5) Pole shape: Conical, Round, Polygonal---Octagonal, Dodecagonal,
6) Type: Straight Pole ,Tensile Pole ,Turn Pole (Double-loop corner
pole, Single or double loops/circuit pole,
single or double tensile/terminal/straight pole, etc)
7) Surface hot-dip-galvanized and sometimes with Bituminous
Painting as customer's request.
8) Resistant: against earthquake of 8.8 grade. Wind speed as
9) Quality Standard: ISO9001:2000,AAA credit rating
10) Easy install and maintenance
11) Packages: Normally covered by sack or as customer’s
But to design the practical poles for customers use, normally we
need customer to provide us some parameter, like as following :
- Pole top design load
- Where is the position of the load , the distance from the top
- The wind Speed
- How will the wire distribute
- Pole type with Burial Type or Base Plate type
- The connections mode , use slip joint or flange
- and others we can further more discuss when we need.
- A factory certificate issued by the factory with stamp and
signature must be provided before unloading the material in our
factory , otherwise we have rights to refuse.
- Before put into production , all the material must be passed the
chemical and physical analysis to make sure that they have met the
requested strength and component.
To assure our products qualified
, we take steps as follows :
1). Management team : We have
employed the experienced senior experts to take charge of the whole
management ,especially the technical management and
quality management .
2). Introducing ISO management
:We are aware of ISO 9001:2008 certificate .
3). QC Inspection :It is our
company policy that all the finished products should be inspected
specialized QC in
every manufacture step and before each shipment
4. Design and Detail
designing software :We have transmission power pole designing
software which can help us
design all kinds of steel poles ,at the same time ,the TMA
and LMA are adopted by us to design the
2. Base Plate
3. Pole Top Cap
4. Butt Bearing Plate
7. Grounding Nut & Bolts
8. Anchor Bolts
9. Climbing Rungs
10. Identification Plate
11. Bituminous Painting if needed
12. Hot dip galvanized.
The fabrication process as cutting plate, bending/forming,
automatic welding, drill holes, quality check before galvanized,
hot dip galvanized , recalibration, inspect according to client’s
required then delivery on time as Constract
Terms and Condition
1. Price Term: EXW, FOB, CFR or CIF.
Ø EXW: Poles Cost
Ø FOB : Pole Cost + Land Transportation + Fee on Port
Ø CFR : Pole Cost + Land Transportation + Fee on Port + Sea Freight
Ø C I F : Pole Cost + Land Transportation + Fee on Port + Sea
Freight + Insurance.
2. MOQ: One 40FT Container.
3. Payment Term: Typically 30% by T/T as deposit, balance by T/T or L/C at sight
before shipment. Other
payment way can be negotiated.
4. Delivery Time: 15 working days per container after PI / drawing / prepayment
5. Package: Normally wrapped by plastic bags or burlap cloth at the top and
bottom,or according to clients’
Our staff supply excellent after service, track and get the product
information after our client got the products. We asked our client
to fill a “Survey form for Satisfaction degree from Client”. We
will solve the problems from client in 24 hours ,and we improve the
quality and working method according to client’s good suggestions.
1. Reply your inquiry in 24 working hours.
2. Experienced staffs answer all your questions in fluent English.
3. Customized design is available. UEM & UBM are welcomed.
4. Exclusive and unique solution can be provided to our customer by
our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our
6. Professional factory : We are manufacturer, specializing in
producing all kinds of steel poles
for more than 10 years, competitive with good quantity.
7 Sample: We can send out sample for test in one week if the order
quantity is big enough.
But the shipment charges is usually paid by your side, the charges
will be rebounded when we have formal order.
8. As an honest seller, we always use superior raw material,
skilled technicians to ensure our products to be finished in high
quality and stable feature.