|
[China]
Trade Verify
Address: Room 2508, 25 / f, Unit 1, Block B, Wanrun International Plaza, Gaoxin 4th Road, Baoji City, Shaanxi Province, China
Contact name:Myrna
Baoji Lihua Nonferrous Metals Co., Ltd. |
|
Verified Suppliers
|
|
|
ANSI B16.5 Grade 2 WN welding neck titanium flange
There are holes in Titanium Asme B16.5 Wn Rf Blind flange and bolts
make two titanium flanges connected to each other. Titanium flanges
can be made by casting, threaded connection or welding.flange joint
includes a pair of titanium flanges, a gasket, a number of bolts
and nuts. The gasket is put between the contact surfaces of two
titaniun flange. After the bolts are tightened,the specific
pressure on gasket are up to a certain value, then the gasket are
out of shape and fill in contacting surface of two titanium flanges
in order to seal flange joint closely.
| Chemical requirements | |||||||||||
| N | C | H | Fe | O | Al | V | Pd | Mo | Ni | Ti | |
| Gr1 | 0.03 | 0.08 | 0.015 | 0.20 | 0.18 | / | / | / | / | / | bal |
| Gr2 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | / | / | bal |
| Gr5 | 0.05 | 0.08 | 0.015 | 0.40 | 0.20 | 5.5~6.75 | 3.5~4.5 | / | / | / | bal |
| Gr7 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | 0.12~0.25 | / | / | bal |
| Gr12 | 0.03 | 0.08 | 0.015 | 0.30 | 0.25 | / | / | / | 0.2~0.4 | 0.6~0.9 | bal |
| Tensile requirements | |||||
| Grade | Tensile srength(min) | Yeild strength(mm) | Elongation(%) | ||
| KSI | MPa | Ksi | MPa | ||
| 1 | 35 | 240 | 20 | 138 | 24 |
| 2 | 50 | 345 | 40 | 275 | 20 |
| 5 | 130 | 895 | 120 | 828 | 10 |
| 7 | 50 | 345 | 40 | 275 | 20 |
| 12 | 70 | 438 | 50 | 345 | 18 |
