Hard Tempered Pure Ni200 Nickel Wire for Electronic Cigarette

Nickel 200/201 is most widely used grade, generally specified for transistor caps, anodes for electronic tubes, leads of electronic components / Lead-in-Wires for lamps and for Wire-Mesh. Also used in strip form for various applications including Ni-Cd batteries.

Tempered Ni200 nickel wire has the feel and consistency of resistance A1 wire, but almost exactly the same resistance as annealed Ni200 wire. Recommended for temperature controlled devices & chips.

a,Available in 20AWG, 22AWG, 24AWG,26AWG, 28AWG, 30AWG, 32AWG, 34 AWG

b,Tempered for a more firm end product

c,Perfect for temperature controlled devices

d,MUCH easier to build with than annealed Ni200

e,NOTE: Heating this wire above 750C (1382 F) will effectively anneal the wire and make soft. 

Condition of Supply

Nickel 200, 201 and 205 are supplied in the following conditions:

• Cold Drawn, Special Tempered.
• Cold Drawn, Annealed. Straightened and Cut Lengths.
• Forms
• Coil – Strip, Foil, Ribbon

• Wire – Profile, Round, Flat, Square

  rod, bar, forgings, plate, sheet 

   

  Chemical composition 

  Grade	Ni+Co	Cu	Si	Mn	C	Mg	S	P	Fe
  N4	99.9	0.015	0.03	0.002	0.01	0.01	0.001	0.001	0.04
  N6	99.6	0.10	0.10	0.05	0.10	0.10	0.005	0.002	0.10
  Ni201	99.0	≤0.25	≤0.35	≤0.35	≤0.02	/	≤0.01	/	≤0.40
  Ni200	99.0	0.20	0.30	0.30	0.15	/	0.01	/	0.40

   

  Size and tolerance

  Diameter	0.03	>0.03-0.10	>0.10-0.40	>0.40-0.80	>0.80-1.20	>1.20-2.00
  Tolerance	±0.0025	±0.005	±0.006	±0.013	±0.02	±0.03

   

  Mechanical property

  Diameter(mm)	Status	Tensile strength,N/mm2		Elongation% (no less than)
  		N4	N6. DN. Nsi0.19. NMg0.1
  0.03-0.20	M	≥370	≥420	15
  0.20-0.50		≥340	≥390	20
  0.50-1.00		≥310	≥370	20
  1.00-6.00		≥290	≥340	25
  0.10-0.50	Y2	685-885	780-980	-
  0.50-1.00		580-785	685-835	-
  1.00-6.00		490-640	540-685	-
  0.03-0.09	Y	780-1275	880-1325	-
  0.09-0.50		753-980	830-1080	-
  0.50-1.00		685-880	735-980	-
  1.00-6.00		535-835	640-885	-