|
[China]
Trade Verify
Address: xiaoshan economic area,xiaoshan,hangzhou,zhejiang province,China.
Contact name:lily
Hangzhou bluesteel machine co., ltd |
|
Verified Suppliers
|
|
|
PLC Computer Control Low Noise Rolling Shutter Door Roll Forming Equipment With Hydraulic System
Description:
This producing line uses galvanized steel sheet, colored armor plate or aluminum plate as the material plate. The products produced by this machine are bright in colored, against fading, resistant to rust, and be widely used in shops, working departments, warehouses, and fire partition. Its strength is three times higher than aluminum alloy door.
Technical data of roller shutter door roll forming machine
Suitable material | color steel sheet;0.7-1.0mm,1.5mm, 2mm |
Working speed | about8-25m/min |
stress | 235MPa,345MPa,550MPa. |
Power | Main motor power: 12 Kw(Depend on final design) |
Hydraulic station power: 3Kw(Depend on final design) | |
Material of forming rollers | No.45 steel, plated with chrome on surface. |
Material of cutter,pressing die | Cr12 mould steel with quench treatment, HRC58-60 |
Material of shaft | High quality 45# steel, Roller grinder milling. |
Shaft diameter | 72mm |
Controlling system | Mitsubishi PLC & converter |
Total weight of machine | About 9500KGS |
Machine’s size | about 18m×1.8m× 1.5m (Depend on final design) |
Layout drawing of machine
Product:
We can also customize the products according to customer ' s requirements
machine, and also train your workers/technician face to face.
b.Without visiting, we will send you user manual and video to teach you to install and operate.
c.If buyer needs our technician to go to your local factory, please arrange board and lodging and
other necessary
things.
a.One year guarantee for whole machine.
b.24 hours technical support by email or calling
c.If there is any problem found of the machine, we will repair it for free in one year.
