Hydraulic Cutting 0.3mm Double Layer Forming Machine Cr12 Roof Panel Roll Former

Steel Roofing Automatic PLC Control Double Layer Forming Machine With Hydraulic Cutting

1. Brief introduction of Double Layer Forming Machine

Double layer forming machines for roofing and cladding sheets , with the greatest advantage is one double layer machine can make two design sheets.

usually, one layer forming machine or single layer forming machine only make one roofing design.

Therefore, if customer has limited install space and required to make two roofing designs, double deck machine is best choose.

shall we introduce you difference between one layer machine and double layer machine?

one layer machine include 5 ton manual decoiler, forming machine with post cut, hydraulic station, plc controller run out table.

double layer machine have additional set rollers and cut blade for another roofing design. that is , two sets rollers share with one machine base, motor , hydraulic station, plc controller and cut frame.

therefore, double layer forming machine only work one layer at one time.

Recently, double layer machine cut controlled by motor is adopted, it is good use in hot area, because, traditionally, hydraulic station give power to cut action, if in hot area, the oil in hydraulic station will very hot.

while motor control cut in hot area is good idea.

2. Specifications of Double Layer Forming Machine

3. Our service of Double Layer Forming Machine

Galvanized Corrugated Steel Sheets Machine after sales services :
1.Warranty :One year,and we will provide technical support for whole life of the equipment.
2. Delivery time: Within 25 days after deposit receipt your payment
3. Guarantee period: 24months free service/ pay service all the machine life
4. Installation and training
If buyers visit our factory and check the machine, we will teach you how to install and use the machine and also train your
workers/technician face to face.

4. details photos of Double Layer Forming Machine