22KW Automatic Steel Plate Granary Silo Forming Machine 120mm Shaft Diameter

22KW Automatic Steel Plate Granary Silo Forming Machine 120mm Shaft Diameter​

Silo roll forming machine:

I:Composition of machine
Roll forming main machine................1 unit
10Tons hydraulic de-coiler with coil car.......1 set
Punching system.....................2 units

Curving Machine..........................1 unit
Control panel..........................1 unit
Hydraulic station.....................1 unit
3M auto stacker............ .........2 unit
Spare tools........................one box

II: Details of each composition
A: Roll forming main machine
1: Coil width: 1000mm effective width:930+3-3 mm (design base on 3mm)
2: working speed: 0-20m/min (not contain cutting and punching)
3: roll station: 17stations

4: material of roller:Gcr15 bearing material;, polished and coated with chrome HRC58-62°
5:material of main shaft:45 forge steel(Same as SAE1045) diameter roller: 150mm
6: main power: 45kw
7: forming thickness: 2.5mm—3.5mm
8: Transmission: by gear box 200*500(outside
9: machine with security fences
10: Roll former has leveling bolts in the base
11: Cutting:
(1)Machine adopt hydraulic cutting
(2)Cutting after forming: Cut the sheet after roll forming to required length
(3)Cutting motion: The main machine automatically stops and the cutting will take place. After the cutting, the main machine will automatically start.
(4)Material of blade: CR12with heat treatment
(5)Length measuring: Automatic length measuring
(6)Tolerance of length: 4700mm+/- 2mm

B.de-coiler
l Single unrolling machine, one side can put material
l Adopt automatic hydraulic system
l Coil weight (Max):10000kg
l Inter diameter: 470mm-520mm
l Maximal out diameter:1800mm
l Oil cylinder dia:120mm working pressure: 20mpa (=20Tons)
l Coil width (Max.):1000mm
l Working speed: 0-25m/min
l Power: 5.5KW
l Hydraulic power: 3kw
l De-coiler should be with Loop control and hold down
l Coil car: 10Tons
l the motor power of coil car: 3Kw
l Pressure: 12Mpa


C: punching system
1: depend on customer punching drawing complete machine need two punching unit and
2: depend on customer punching request this machine adopt punching after roll forming.
3: punching mould material: Cr12 with HRC58-62°
4: hydraulic power: 11KW
5: pressure: 25Mpa
6: diameter of oil pump: 200mm

D: Control panel Japan Mitsubishi
(1)Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase
(2)Automatic length measurement:
(3)Automatic quantity measurement
(4)Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5)Length inaccuracy can be amended easily.
(6).Control panel: Button-type switch and touch screen
(7)Unit of length: millimeter (switched on the control panel)
(8) Laguage: English, Spanish and Chinese

E: Hydraulic station
1: hydraulic station power: 11kw
2: hydraulic pressure: 25Mpa

Service:

1. Before-sales
   1. We will answer the customer asap. (within 24hours)
   2. We can design the machine according to customer’s detail requests.
2. After-service:
   1. In correct operation & maintaining, the machine is guaranteed for one year
   2. If necessary, we will dispatch technicians to install and commissioning, and also our technicians will teach and training the customer’s workers to use the machine better.
   3. We will provide long-term technical assistance.