Wireless USB 3.2V Optical Mouse Chip With 3204 3205 IC Integrated
Circuits
IC product name: Optical wireless mouse chip
Chip product model: GZ-P001-KA8
Integrated circuit product description: KA8 is a highly integrated
optical mouse chip with USB interface that adopts more advanced
manufacturing technology and better photosensitive ability, which
can replace 3205 and 3204 original phase chips;
Product application: wireless USB optical mouse;
Chip pin layout diagram:
Chip pin description:
Number | Name | Type | Definition |
1 | NC | | |
2 | MOTSWK | OUT | Motion detection, low-level output |
3 | SDIO | I/O | Serial interface bidirectional data |
4 | SCLK | IN | Serial interface clock |
5 | LED | OUT | LED control output |
6 | VSS | GND | Chip ground |
7 | VDD | PWR | Power supply internal power regulator, (2.5V~3.2V) supply VDDA
(1.9V) is the power supply regulator output.
Power supply voltage low power operation (1.73V~1.94V) |
8 | AVDD | PWR | Power supply for analog/digital circuit (1.8V)
Power supply voltage low power operation (1.73V~1.94V) |
Features of wireless mouse chip:
1. Single power supply, power supply range: 1.7V to 3.2V
2. Precise optical displacement prediction technology
3. Very good 2-D motion sensor
4. Support extremely fast movement speed
5. Maximum movement speed: 28 inches/sec
6. CPI up to 1600
7. Once you are not exercising, immediately enter the energy-saving
mode
8. Data transmission is realized through serial interface
9. Built-in low-power timer (LPT), there are two modes of
sleep1/sleep2
10. The mouse can be waked up by the MOTSWK pin, and the sensor can
wake up from sleep mode
11. LED current-limiting resistance: 68 ohms -470 ohms (depending
on the actual solution to determine the resistance), recommended:
100 ohms
specification:
Power supply operating voltage: 1.73V ~ 1.94V (VDD and AVDD short)
2.2V ~ 3.2V (VDD) Optical lens: 1:1 Speed: 28 inches/sec CPI: 400/
500/ 600/ 800/ 1000(Default)/ 1200/ 1600 CPI frame rate: 3000
frames/sec. Typical operating current:
2mA @mouse movement (normal)
300uA @Mouse does not move (Sleep1)
60uA @Mouse does not move (Sleep2)
7uA @power down mode
SPI interface register reading and writing:
Registers in the address segment 0X00~0X0E can be directly read and
written;
Read and write registers in the 0X10~0X7F address segment must
first open the read and write protection registers, that is,
configure the following two registers (generally not used in
applications)
Write 0X5A to 0X09;
Write 0X9A to 0X5B.
There is an oscillator with a frequency of about 24Mhz inside the
V108, which can be selected through the configuration register. The
specific configuration is as follows: first turn on write
protection
Reg0X51 = 0x0B is to select external resistance, Reg0X51 = 0x09 is
to select internal resistance,
Reg0X53 is the internal resistance adjustment register. When
Reg0X53=0x00, the frequency is the highest, and when Reg0X53=0x7f,
the frequency is the lowest. The default value Reg0X53=0x48.
Chip picture:
FAQ
Q1) Since it is our first cooperation, is payment safe for me?
Answer: Our company is certified and registered in China and Hong
Kong. This will ensure that your products are received. We also
accept other secure payment methods you want.
Q2) Are you a manufacturer (factory)?
Answer: Yes. OEM/ODM services are also provided here. Welcome to
share your thoughts with us. We are happy to provide you with the
best solution.
Q3): What is the delivery time?
Answer: Bulk orders: 2-20 days, depending on the order quantity.
Sample: 1 day when in stock, 20 days for custom design.
Q4): Do you accept door delivery service?
Answer: Yes, we are willing. We also have discounts on prices such
as DHL / FEDEX / UPS / TNT / ARAMEX
