Active Member
|
[China]
Address: Block 1, Beihuayuanjie, Chaoyang, Beijing 100024, China; market@sinosteelengineering.com
Contact name:
BEIJING SINO STEEL ENGINEERING & EQUIPMENT CO., LTD. |
|
|
Copper mould tube for CCM round bloom Φ80mm to Φ900mm quadruplicate taper
To offer billet, round and bloom sized continuous casting machine and related spare parts.
Arc radius can be from 3.5m to 14m.
The strand can be 1-6.
Kinds of billet type continuous casting machine:
60mmX60mm to 700mmX700mm, of round one from Φ80mm to Φ900mm,
slab one from 120mmX850mm to 3600mmX1000mm
·Ladle turret: Straight arm type, and can be with automatic
weighing device, emergency driven unit and driven by electric
motor.
·Oscillator : Guided by spring steel plate, it is outside the
secondary cooling chamber , far away from the high temperature
zone, easy for maintance.
·Copper mold tube assembly: The products are used by well-known steel mill both at home and abroad.
·Withdrawal and straightening unit: The straightener adopts the
gradually straightening technic. The rollers are driven by
three-ring reducers and hydro-cylinder.
·Flame cutter: High-speed narrow slit cutter, along with the
unpowered cutting car. Guidance mechanism decides the torch swing.
·Dummy bar: Rigid dummy bar or flexible dummy bar.
·Electric control system: This system uses Simens PLC control
scheme, carrying on the surveillance by a computer..
| NO | Supply details |
| I | Spare parts of CCM |
| 1 | Ladle turret |
| 2 | Tundish and its cover device |
| 3 | Tundish dryer |
| 4 | Tundish car |
| 5 | Steel liquid overflow tank |
| 6 | Crystallizer assembly |
| 7 | Vibration device |
| 8 | Guiding section |
| 9 | Second cooling device |
| 10 | Straightening and withdrawal device |
| 11 | Roller table before cutting |
| 12 | Flame cutter |
| 13 | Dummy bar |
| 14 | Dummy bar storage device |
| 15 | Cut-to-length device |
| 16 | Transmission roller table |
| 17 | Knock-out roller table |
| 18 | Cooling bed and pusher |
| 19 | Billet pusher |
| II | Process operation system |
| 1 | Hydraulic system |
| 2 | Water cooling system |
| 3 | Electric and instrument control system |
| 4 | Pheumatic system |
| 5 | Steam exhausted system |
| Material | Chemical Composition | Mechanical Properties | Electric Conductivity (%IACS) | ||||
Cu (%) | Others (%) | Tensile Strength σ b (N/mm2) | Yield Strength σ 0.2 (N/mm2) | Elongation δ (%) | Hardness (HB) | ||
| E-Cu | ＞99.90 | 200 | 40 | 40 | 45 | 98 | |
| SF-Cu | ＞99.85 | P0.015-0.040 | 240-310 | 190-250 | 25-10 | 80-95 | 85 |
| CuAg | ＞99.50 | Ag0.08-0.12 | 240-310 | 200-225 | 16-10 | 110-125 | 95 |
| Cu-Cr-Zr | ＞98.0 | Cr0.3-1.2 Zr0.08-0.3 | 375-445 | 280-355 | 20-13 | 115-130 | 80 |
| 30 | 780 | □150×150 | straight | 10 | 22 | 12 | 0.06~0.08 |
| 31 | 800 | □150×150 | 5250 | 12 | 20 | 8 | 0.08~0.10 |
| 32 | 810 | □150×150 | 6000 | 12 | 22 | 10 | 0.06~0.08 |
| 33 | 812 | □150×150 | 5250 | 15 | 27 | 12 | 0.06~0.08 |
| 34 | 812 | □150×150 | 8000 | 12 | 18 | 6 | 0.13 |
| 35 | 850 | □150×150 | 6000 | 12 | 20 | 8 | 0.06~0.08 |
| 36 | 780 | □160×160 | 7000 | 12 | 17 | 6 | 0.06~0.08 |
| 37 | 790 | □160×160 | 6000 | 14.5 | 24 | 6 | 0.10 |
| 38 | 812 | □160×160 | 6000 | 12.5 | 20 | 8 | 0.12 |
| 39 | 1000 | □160×160 | 6000 | 12 | 20 | 8 | 0.08~0.10 |
| 40 | 800 | □165×165 | 6000 | 12 | 22 | 10 | 0.06~0.08 |
| 41 | 800 | □175×175 | 6000 | 12 | 20 | 8 | 0.05~0.07 |
| 42 | 700 | □180×180 | 12000 | 14 | 22 | 8 | 0.06~0.08 |
| 43 | 801 | □180×180 | 10250 | 14.5 | 20 | 6 | 0.06~0.08 |
| 44 | 1000 | □200×200 | 6000 | 14 | 20 | 6 | 0.06~0.08 |
| 45 | 1000 | □260×260
| 10250 | 21 | 28 | 8 | 0.08~0.10 |
| 46 | 1000 | □300×300 | 12000 | 22 | 28 | 6 | 0.08~0.10 |
No. | Length (mm) | Section Dimension (mm) | Curved Radius (mm) | Wall Thickness (mm) | Outer Corner Radius (mm) | Inner Corner Radius (mm) | Cr-Coating Thickness (mm) |
| 1 | 800 | 130×240 | 5000 | 14 | 22 | 8 | 0.06~0.08 |
| 2 | 812 | 130×240 | 5250 | 14 | 24 | 10 | 0.06~0.08 |
| 3 | 700 | 150×180 | 6000 | 12 | 24 | 12 | 0.06~0.08 |
| 4 | 780 | 150×220 | 4560 | 14 | 29 | 15 | 0.06~0.08 |
| 5 | 812 | 150×220 | 6000 | 14 | 20 | 10 | 0.13 |
| 6 | 812 | 150×220 | 6000 | 14 | 20 | 6 | 0.13 |
| 7 | 812 | 150×220 | 7000 | 14 | 24 | 10 | 0.09~0.12 |
| 8 | 700 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 9 | 810 | 160×200 | 6000 | 14 | 29 | 15 | 0.06~0.08 |
| 10 | 812 | 180×220 | 7000 | 12 | 20 | 8 | 0.13 |
| 11 | 812 | 180×220 | 7925 | 14 | 22 | 8 | 0.06~0.08 |
| 12 | 812 | 180×220 | 8000 | 14.5 | 22 | 8 | 0.10 |
| 13 | 700 | 200×240 | 6000 | 16 | 24 | 8 | 0.08~0.10 |
| 14 | 1000 | 235×265 | 11000 | 19 | 25 | 6 | 0.06~0.08 |
| No. | Length (mm) | Section Dimension (mm) | Curved Radius (mm) | Wall Thickness (mm) | Cr-Coating Thickness (mm) |
| 1 | 780 | Ф156 | 9000 | 14 | 0.10 |
| 2 | 780 | Ф178 | 9000 | 14 | 0.10 |
| 3 | 850 | Ф300 | 9000 | 14 | 0.10 |
| 4 | 1000 | Ф500 | 9000 | 14 | 0.10 |
| 5 | 1000 | Ф800 | 9000 | 14 | 0.10 |
