|
[China]
Trade Verify
Address: No.53 Yungu Road,Changshou,Zhouzhuang Town,Jiangyin, Jiangsu, China
Contact name:christine Lu
Jiangyin Huake Machinery Co.,Ltd |
|
Verified Suppliers
|
|
|
See product vedio:
https://youtu.be/mAV2bZlKvpk
https://youtu.be/pzZMASbWPZM
https://youtu.be/jYd8TdAVDu4
Efficient Box Shears
contnious container shear is an efficient scrap processing equipment. The original designer of the box shearing machine originated from Europe. Its compact structure, one-piece design is easy to move, and it can be controlled by a hybrid engine and motor, or it can be controlled by the engine or motor alone. The biggest advantage of the box shear is its high overall utilization rate. It can mainly be reflected from labor, energy consumption, mechanical loss, equipment maintenance costs, etc. The body of the box shearing machine is welded with high-strength manganese plates, and the 900 high-strength wear-resistant plate is used for the lining plate in the easy-to-wear parts. The blade of the box-type shearing machine is made of alloy steel, which can withstand a long time. of high-intensity work. The hydraulic system of the box-type shearing machine adopts the hydraulic cycle design, which speeds up the shearing speed of the box-type shearing machine. The general box-type shearing machine can only cut 3.5 times a minute, and the cycle design can reach 4.5 times. speed, greatly improving work efficiency.
Advantages of box shears
1. Low operating cost, high efficiency, no pre-press cover, less operation, and continuous feeding.
2. The self-enclosed operation is fully controlled by PLC, which greatly improves the work efficiency.
3. Load and transport by towing vehicle.
4. Small size, integrated, high stability.
5. Box shears can be engine controlled.
6. Low investment and operating costs.
7. Box shears have a wear plate cover on all inner surfaces, so there is less wear.
8. The waste is added from above, and the waste is compressed by the pre-compression cylinder and automatically slides down and is cut by the shearing cylinder. This design greatly improves the efficiency and safety of the equipment.
CONTAINER TYPE SHEAR FOR CUTTING SCRAP METALS
metal shear is applicable for cutting the metal shaped in different cross section like round,
square, channel, angle, I shape, plate and various waste structural
metal at cold state. It brings convenience to the baling, storage and transporation of
scrap metal materials, also offers qualified furance charge for
smelting plant. With large application range, this machine is
commonly used as the processing equipment in the metal recycling
unit, casting room of factory and machinery construction industry.
Box shears, also known as horizontal shears, are a new type of
shearing equipment that can process large amounts of scrap metal.
Due to the continuous progress of society and the continuous
increase of labor costs, operators are increasingly eager to save
resources and improve efficiency, which prompted the birth of box
shears.
Our shear has speeder, when unload, one cylinder will drive the
main shearing cylinder to move, with more than 50% faster speed,
save more than 30% time.
ADVANTAGES ；
1. Low operating cost, high efficiency, no pre-gap, less operation,
and continuous feeding.
2. The self-enclosed operation is fully controlled by PLC, which
greatly improves the work efficiency.
3. Loading and transportation by towing vehicles.
4. Small size, integrated type, high stability.
5. The box shear can be controlled by an engine.
6. Low investment and operating costs.
7. All inner surfaces of box shears have a wear plate cover, so
there is less wear.
8. The waste material is added from above, and the waste material
is compressed by the pre-compression cylinder
and automatically slides down and is sheared by the shearing cylinder. This design greatly improves the efficiency and safety of the equipment.
HYDRAULIC SCRAP METAL STEEL CONTAINER BOX TYPE SHEAR
PARAMETERS:
CONTAINER TYPE SHEAR FOR CUTTING SCRAP METALS
Contact us! We would like to tell you more about our shearing
system.
| Item No. | PARAMETERS | REMARKS | |||||||||
| 1 | SHEARING CYLINDER | Model | YG340/220-870 | Travel length | 870mm | 250tons *2=500 tons | |||||
| Nominal Thrust | 2500X2kN | Quantity | 2 | ||||||||
| 2 | MATERIAL HOLDING CYLINDER | Model | YG240/160-890 | Travel length | 890mm | 125tons pressure | |||||
| Nominal Thrust | 1320KN | Quantity | 1 | ||||||||
| 4 | Material Box Dimension(L×W×H) | 2200×1400×400 mm | |||||||||
| 5 | Hydraulic system working pressure | 25MPa | |||||||||
| 6 | Hopper size | 2200X1400(mm) | |||||||||
| 7 | Cutting length/maximum holdling range | 1400mm / 450mm | |||||||||
| 8 | Total power | 75kW | |||||||||
| 9 | Power specification | 380V/3PH,50Hz | |||||||||
| 10 | Cutting angle | V shape+9 degrees | |||||||||
| 13 | maximum cutting range Δb≤450Mpa | Round steel:φ150mm | FROM MIDDLE PISITION OF THE BLADES | ||||||||
| Square steel bar:100×100mm | |||||||||||
| Steel plate:40×600mm | |||||||||||
| 14 | Shearing frequency | 2-3times/minute | |||||||||
| 16 | Machine outer size | 6000×2220×3550mm | |||||||||
| 18 | Oil tank volume | 3500 litres | |||||||||
| 20 | Electric Motor | Model | Y225M-6 | Rated power | 45 +30KW | ||||||
| Rated speed | 970 rpm | Quantity | 1+1 | ||||||||
| 21 | Hydraulic pump | Model | HY250/YCY160 | Rated Pressure | 31.5MPa | ||||||
| Nominal Displacement | 250ml/r/160ml/r | Quantity | 1+1 | ||||||||
RELATED PRODUCTS ALSO HOT SELLING :
Some other high efficiency scrap shearing machines that people are
buying :
Ganry type heavy duty scrap metal shear with big material box:
https://youtu.be/KW6k9f6CRMc
