0.4mm-20mm Custom Stamped Metal Parts Aluminium Sheet Metal Fabrication

Custom Metal Stamping Parts Aluminum Steel Sheet Metal Fabrication

Sheet metal fabrication is very popular, and now people's requirements for things are constantly improving, so in terms of technology, it is also necessary to continue to update, electronic and electrical production of fine parts, to help the field of communication, and to produce car shells for the car manufacturing process body. Others are also used in the production of medical devices. After all, it has a very wide range of uses and brings a lot of convenience to our lives.

Precautions for sheet metal fabrication:

1. All electrochemical treatment should be carried out in the state of the parts, because the chemical solution in the treatment process will be trapped in the gaps of the assembly and cause corrosion;

2. Spot-welded parts can be chemically treated, but not electrochemically treated (including electroplating and anodizing);

3. Aluminum alloy castings cannot be anodized with sulfuric acid;

4. Thin and long tubular parts (the length of which is greater than 2 times the diameter) are generally not suitable for electrochemical treatment, because there will be no film layer on the inner surface; (special methods can be used to meet the requirements in special cases)

5. After the parts with deep grooves or pores (generally refers to the depth greater than 2 times the diameter or the opening width, but the excellent process is not limited by this), the inner surface of the parts will not completely cover the coating.

Product parameters: