|
[China]
Trade Verify
Address: 102，No.42， Xibin Road,Xinglin，Jimei district,Xiamen,China,361022
Contact name:Kelly Lam
Xiamen METS Industry & Trade Co., Ltd |
|
Verified Suppliers
|
|
|
Continuous stamping product consistency is very good metal roof panel clip,sheet metal
fabrication
Metal Stamping Die Capability
· Die Insert Tolerence: +/-0.005mm
· Stamping Speed: 1000SPM/min
· Tooling Life: 50-300 million times
METS Precision-Tool uses a variety of 2D and 3D cad/cam Software to develop, design, and plan the layout of our dies. (see below for the full software list & details). We have the resources to build a die for any application. When high volumes of production are expected, we can build a dependable tool with longevity in mind. We can also produce low-cost tools for prototyping and sampling applications. Die protection is always on our mind, and DACO Precision-Tool can build in sensors that will help prevent costly damage to the die.
Metal Stamped Parts & Components
We stamp metal parts ranging from small precision parts, such as electronic equipment and musical instruments, to large precision components, including processing equipment and architectural components that are decorative and functional. All-New Stamping has the capability to work in quantities from prototype runs to full production runs.
Our stock thickness for our ferrous and non-ferrous metals ranges from 0.01mm to 2mm and the stock width ranges from 10mm to 1000mm with pre-plated and finishing options. We also work with a complete range of materials to offer customers a large choice in specifications, including:
Steel
Aluminum
Stainless Steel
Plastics
Copper
Brass
Specialty Metals
Compound Die Stamping is the process where the die separates or blanks the part from a steel strip in one stroke. A Compound Die will perform multiple cuts or punches in one stroke, as compared to multiple strokes. This is a very cost effective method for stamping medium to high volume parts while keeping labor and die costs down. Compound Dies are often used to stamp simpler flat parts such as washers.
Here at METS Precision-Tool it’s our goal to design and build our Compound Dies to exceed 100 strokes per minute to support high volume production. We can achieve this by building in sensors and other accessories to protect the die from damage. Cycle time is always kept in mind when designing and building our Compound Die tooling. We can build the die to stamp the part at the accuracy you need.
Parts are produced when the feed system pushes (strip or coil stock) of raw material into the Compound Die; at each stroke or cycle a finished flat part will blanked or released from the raw material. The feed rate of the material is determined by the size of the part. Larger parts need more time to exit the die, where smaller parts exit quicker allowing for faster run times. Typically, compound dies do not require a cut-off station because the parts are blanked through from the strip, but many times is added to help manage scrap material. Finished parts will be removed from the die by a knock-out and will fall onto a chute or slider where they flow into the collection bin. The scrap will exit the die in strip form or in piece form depending on if you’ve included a scrap cut-off station. Scrap can be collected in bins or hoppers on the exit end of the die
Tool&Die Profile
| Tool&Die Material | SKD11 DC53 45# steel Cr12mov P20 |
| Accuracy | 0.002mm |
| Capacity | Tool &die :30 sets/month part :1million /month |
| Design software | 3D: Pro-E |
| 2D: auto CAD | |
| Surface Treatment | Powder coating,Hot galvanized,Painting,Polishing,Brushing,Chrome, |
| Test Equipment | Hardness tester,Chemical analysis,Digital Measuring Projector, Dynamic Balancing Tester, |
| universal testing machine & Coordinate-Detector | |
| Thickness | 0.1-2.0mm or other special available |
| Lead time | 15-55 days according to products Max: 2 Weeks (On Initial Order) |
| Standard | ANSI. API.BS.DIN.JIS.GB.etc |
| Equipment | 1) Stamping machine |
| 2) CNC milling and turning, grinding, honing, lapping, broaching and other secondary machining. | |
| 3) integral CNC machineries & four machining centers, such as milling, broaching, drilling, | |
| turning, planning, grinding machinery and three-axle machining centers. | |
| Productions Cover | Sheet metal auto parts, Auto stamping parts,Home Electrics stampingparts, Device stamping parts |
Packing:
First Step Wrapping by PE film to anti-rust.
Second wooden case without need of fumigation.Or as your required.
FAQ
Q: What’s your manufacture capability?
---- We use Sodick/Charmilles to frabricate die inserts,dimension
we can do is +/-0.002mm.
Q: Can you make all the dimensions are according to our
design/samples?
---- We can guarantee that all the dimensions are made according to
your drawing/sample.Please notice that dimension tolerence we can
do is +/-0.003mm.
Q: Did the stamping die suit for my press machine?
--- The stamping die is made according to your press machine’s
specification.Before start making die parts,we will send the design
for your approval.
Q: What’s your advantage compare with other supplier’s on the
market?
---- We are stamping factory,have a team contains die
design,making,maintance and stamping production.We know how
important the good mold for stamping production.
---- All our engineers are with more than 10 years working
experience.They are more professional on precision stamping field.
---- All the die parts we made are by Slow-speed wire EDM,can
gurantee the dimension.Many of them make it by middle-speed wire
EDM/fast-speed wire EDM
To get quick response, please contact us by mail directly
Q: How can I get quotation quickly
A: Please send your inquiry and technical details to Our sales
Consultand will contact you in 24hrs on business time.
Q: How can I get technical support from you when we are designing a
new product?
A: Please feel free to contact with the same email .There will be
an exclusive engineer available for you.
Q: How can I contact you when I have some suggestion about your
products or service?
A: Please feel free to contact email or phone.We will follow on
your suggestion and try our best to make you satisfied.
Stamping die Shows:
