Copper Aluminum Radiator Scrap Metal Separator Full Automatic Industry

Full Automatic Industry Use Copper Radiator Scrap Metal Separator

Machine use to recycling copper in radiator ,to get copper from scrap or used radiator , need manual to operate .
Usually need use two machine :
1.saw machine use to cutting radiator into small pieces or suitable size then feed into separating machine ,prepare for following copper collection
2.Separator machine can be use to separate aluminum and copper . Have automatic model and semi -automatic model ,
before choice machine first need to measure the distance between two copper pipe , that will have influence the distance between blade .

Application:
The radiator recycling machine is use for separating the outside aluminum foil and the inside copper pipe of wasted air conditioning radiator,
and it is an ideal machine for recycling copper and aluminum

Specifications of Radiator recycling machine:

Waste radiator separator Main parts:
1. motor
2. reduction box
3. rack
4. press roller
5. blade
6. pinch roller

Main structure of radiator separating machine:
1. Compressing part: It is radiator compressing system, the gear compressor is used for removing aluminum part on the radiator.
2. Radiator input plate: Normally there are 3 parts for radiator input, and they have different width for different size radiators. Customer need to put proper size(center distance) radiator on it.
3. Handle: There are totally 6 handles on the machine to adjust blades inside it.
4. Motor: There are two motors on both sides of the machine.
5. Control panel: There are Start,End and Emergency buttons on the panel.
6. Blades: Blades used for cutting radiators.

Working principle of scrap radiator separating machine:
1. After starting motor, the v- belt drives the compression roller, pinch roller, and blade to rotate through the reduction box.
2. The raw material is compact and sent to the fly-cutter blade by pinch roller.
3. Then, the radiator is cut up by the fly-cutter blade, the copper pipe is separated, and the
aluminum scattered network is cut up.
4. The machine limited to single,double radiator copper and aluminum are separated layers
separating copper and aluminum radiators work completed by the entire unit.

FAQ:

Q:What’s the spare parts of the separator?
A: Spare parts of the separator are blades and belt, we will supply extra parts according to customers’ requirement.

Q:What’s the warranty time for the equipment?
A: 12 months. During the warranty period, if there is any problem due to quality,we will supply spare parts for free, and customers take charge of delivery cost.

Q:What’s ordinary delivery time of the separating machine?
A: Within 12 working days.