Professional CE Approved Automatic Scrap Metal Steel Shearing Machine

Professional CE Approved Automatic Scrap Metal Steel Shearing Machine

Hydraulic alligator shear is suitable for metal recovery processing plant, scrap car dismantling field, smelting foundry industry, the cold cut of all kinds of steel and metal structure parts, and processed into qualified furnace material. The device body adopts steel casting, overcomes the disadvantage of easy deformation of the welded plate. A new integration design, which avoids the disadvantage of site secondary installation. Shear head adopts steel casting, more durable. This machine is equipped with fast unit, and the shearing speed is doubled than before, the power is saved by 50%. Compared with the mechanical transmission type cutting machine, the equipment has the advantages of small volume, light weight, low inertia, low noise, smooth operation, easy operation, flexible operation, large shear section and easy adjustment of scissors. It is safe to operate and easy to realize overload protection.

Applicable materials of metal shear/shearing machine:
Metal, iron, cast iron, thin iron, steel, color steel tile, scrap steel, scrap iron, aluminum alloy, channel steel, angle steel, angle iron, copper plate, sheet metal, aluminum profile, scrap steel, aluminum plate, Iron plate, steel plate, round steel, scrap metal.

Features of hydraulic alligator shear:
1 Such machineries adopt hydraulic drive ,with manual or PLC automatic control operation as options .
2 The hydraulic system applies an integrated valve block and the product is stable and reliable in technical performance.
3 The discharging types fall into turning over ,push out ,forward out and manual lifting .
4 It is unnecessary to fix foot screw and a diesel engine can be used in case of power supply unavailability .
5 The extrusion force ranges from 63t to 400t ,totaling 10 grades for customers’ selection ,and productivity being from 4t/shift to 40t/shift .
6 The size of the compression chamber and the form and size of the bale can be designed and customized according to the requirement of the customers .

Safety operation rules of alligator shearing machine:
1. crocodile scrap metal shearing machine should be operated by the designated persons. Others can not be used arbitrarily without training.
2. before driving, check whether the parts are normal and whether the fasteners are solid.
3. unannealed steel, cast iron, soft metal parts, too thin pieces, work pieces of less than 100 millimeters in length, and work pieces that exceed the length of scissors are prohibited from shearing.
4. when operating, the body is not allowed to approach the transmission part and knife edge of the equipment, and the safety of the surrounding personnel should be paid attention to, so as to prevent the material from rising and hurting people. When cutting, the material should be cut near the edge of the knife as far as possible.
5. When cutting short material, hand-held work piece is prohibited. The clamp should be used.
6. when the scrap metal shearing machine operate, the operator shall not leave the post without authorization. When the work is completed or the post is temporarily left, the power supply should be cut off. At the same time, the machine should not be repaired or touched by hand, and the hand or foot is strictly prohibited to press the material in the material box.
7. The lubricating parts of crocodile scrap metal shearing machine should be lubricated at least once per shift according to the requirements.

Specifications of crocodile shears: