LR SCH10S A403 WP304 Forged Steel Pipe Fittings 8 Inch Elbow 45 Degree

Pipe Elbow Fittings A403 WP304 Stainless Steel 45 Degree Elbow ,Forged 8 Inch Sch 10s LR

Using forging machinery to apply pressure on metal billets, The plastic deformation is made to obtain the machining method of forgings with certain mechanical properties, certain shape and size. Through the constant beating of the fittings, Compaction and welding the original segregation, porosity, porosity and slag inclusion in the ingot, It's getting closer, improves the plastic and mechanical properties of the metal. Forging pipe fittings mainly include forging flange, Forged diameters, Forging three links, etc. q235, are the main materials for forging fittings q345, 16 mn, 20#, 35#, 45#, 40Cr, 12Cr1MoV, 30CrMo, 15CrMo, 20G, etc. Corresponding to the forged fittings are cast fittings, The mechanical properties of castings are lower than those of forgings of the same material, The casting fittings melt the metal into a liquid that meets certain requirements and pour it into the mold, The process of obtaining castings (parts or blanks) with predetermined shape, size and properties after cooling solidification and cleaning.

Elbow is a kind of pipe fittings commonly used in plumbing installation, which is used to connect at the bend of pipe and to change the direction of pipe.

Other names :90 elbow, right angle bend, love bend, punching elbow, pressing elbow, mechanism elbow, welding elbow, etc.

Purpose: Connect two pipes with the same nominal diameter or different diameter so that the pipes can be turned 90,45,180 and various degrees.

The bending radius is less than 1.5 times of the diameter of the pipe, and 1.5 times of the diameter of the pipe belongs to the elbow.

The 45-degree elbow is a piped part and a pipe connection . Used in the main road and branch management to change the direction of the pipe .Connections to tubes are : direct welding (most commonly used ) flange connections , hot melt connections , electromelt connections ,threaded connections and plug-in connections.

Carbon steel by material ,cast steel , alloy steel , stainless steel , copper , aluminum alloy , plastic , lyse , ppc and so on.

45 degree stainless steel elbow 45 degree stainless steel elbow

The diameter is known as the diameter 

Connections to tubes are: direct welding (most commonly used) flange connections ,hot melt connections , electromelt connections ,threaded connections and plug-in connections. According to the production process can be divided into: welding elbows, stamping elbows ,pushing elbows, casting elbows and so on