Polishing Surface White Marble Statue Sculpture Customized

Marble statue white marble statue sculpture can be customized

Description of Art Sculptures

1, marble carving art - round carving

Round carving, also known as three-dimensional carving, is the overall performance of art on the carved pieces, and the viewer can see all sides of the object from different angles. It requires the carver to carve from front, back, left, right, top, middle and bottom. It is the most basic technique in stone carving.

Round carvings are generally "carved" from the front orientation, and special attention is required to the unity and harmony of each Angle and orientation of the work. Only in this way can the round carvings stand a full range of viewers.

Because the round carvings are very three-dimensional, vivid, lifelike, vivid, so the round carvings on the choice of marble requirements are more strict, from length, width to thickness must have the appropriate proportion with the real thing, and then the carvers according to the proportion of "billet". "Billet" is the first procedure in the round carving, is also an important link, especially large round carving works, also need to first in the clay "billet", to be revised to keep the "clay draft", and then formally on the marble "billet". The aim is to ensure that the parts of the sculpture are in strict proportion before the knife is used to create a vivid sculpture.

With the passage of time, the theme of stone carving continues to expand, stone carving techniques also continue to enrich the development, on the basis of round carving techniques, the emergence of carving, chain carving. In terms of the expression content, it also developed from an independent individual to a large group sculpture combining figures, animals and landscapes, which made the round sculpture more rich and perfect from the techniques to the content of the works. The same round carving work is often a combination of round carving, carving, chain carving and other techniques.

2, marble sculpture art - carving

Carving is also known as hollowing out, that is, the stone does not show the part of the image hollowed out, to show the part of the image retained. Based on the difficulty of carving is very great, so from stone selection, work layout, tool equipment to engraving procedures, and general engraving techniques are different. The carved stone must be fine and pure, especially the hollow part, there should be no cracks and high density sand, otherwise it is easy to cause fracture. The tools used for carving, in addition to the general engraving tool, also need special long arm chisel, scraper knife, shovel bottom knife, hook knife, as well as small saw thorns and other special tools. Because it overcame difficulties in operation by means of direction, it was preferable that landscapes be designed faceted and permeable. Generally speaking, the more direction of penetration, the more dense the cavity, the easier the carving, the better the effect. The process of carving is "outside after inside", to be the outer scenery and other lining of the billet, chisel process after all, to carry out carving.

Marble has beautiful color, pattern, high compressive strength and good physical and chemical properties, wide distribution of resources, easy to process, with the development of the economy, the scope of marble application continues to expand, the amount of more and more large, plays an important role in people's life. Especially in the past ten years marble large-scale mining, industrial processing, international trade, so that marble decorative plate mass into the building decoration industry, not only used for luxury public buildings, but also into the family decoration.

Marble is also widely used in the manufacture of exquisite appliances, such as furniture, lamps, tobacco and art sculpture. Some marble (including limestone, dolomite, marble, etc.) can also be used as alkali resistant material. In the marble mining, processing process produced in the rubble, corner residual material is also often used in the production of artificial stone, terrazzo, stone rice, stone powder, can be used for coating, plastic, rubber and other industries filler.

Specification of Art Sculptures

1.High-quality materials

No Matter we use stainless steel plate or stainless steel tubes,We can see the thickness and the surface effect, all use the special exported standrard raw material, generally have 304 stainless steel and 316L stainless steel for your choose, the thickness can be 2-3.5mm.

Our raw materials come from government-operated stainless steel factories, and we have test certification for each batch of materials. We only use 304 or 316 to make stainless steel sculptures. However, other businesses use 201 stainless steel for low prices.

Resin sculpture production process

Fiberglass sculpture is a finished type of sculpture. Fiberglass sculpture has the characteristics of light weight, corrosion resistance and relatively low cost. FRP, also known as FRP, is known as fiber reinforced plastic. It is a composite material composed of synthetic resin as matrix material and glass fiber and its products as reinforcement material.

Production Flow

1. Showing the details drawing/ 3D mold for clients to confirm.

2. Making exact structures according to drawing/ client's photos/ 3D mold.

3. Cover the stainless steel plate on existing structures.

4. Welding and polishing the surface.

5. Stand up and take all different views pictures/ videos, show to clients.

6. Packing into iron box after clients are satisfied with sculptures.