Wire Diameter 4-8mm Middle-Sized Reinforcing Steel Bar Mesh
Welding Machine
Reinforcing Steel Bar Mesh Welding Machine Introduction:
1. This reinforcing steel bar mesh welding machine is controlled by
the special computer, the welding current and welding time in each
welding transformer can be individually adjusted. The machine
operating interface is made up with color touch screen and control
buttons, easy to operate.
2. Host framework structure, stable performance, the welding
pressure is continuously adjustable, solid and perfect welding
spot.
3. Integrated deceleration electromagnetic brake motors for power,
inverter control, adjustable speed.
4. Modular design for the upper and lower electrodes, convenient to
adjust the mesh.
5. weft-hopper obtains wires by motor driver devices, electric
magnetic increase feeding device auto-feeding the wefts into the
preparation area of disc device from the large hopper, and the weft
hopper is installed in the removable pull rid, convenient to adjust
and maintain.
6. The mesh pulling part driven by servo motor can be set a variety
of weft space in the same mesh, pull the mesh continuously back and
forth to extend the size of mesh, and use pneumatic clamping device
to accurate weft spacing.
7. The warp feeding part driven by stepper motor can be fed the
warps which a whole mesh needs when welding, so that the machine is
very short interval of time.
8. Automatic CNC steel mesh welding machine WZ-2500A is equipped
with a mesh roller frame and removable warp frame.
Reinforcing Steel Bar Mesh Welding Machine Producing Procession
1. Realize the automatic alignment of the line wires into the
welding position, reduce the welding wait time, very good to
achieve
a neat hair head, hair head length can be adjusted effect;
2. The line wires feeding part mainly realizes that each line wires
head is aligned and quickly feeds to the welding position,
shortens the mesh welding interval time;
3. The line wires feeding part mainly consists of line wires
feeding trolley, line wires feeding trolley track, line wires
alignment device and so on;
4. When the line wires feeding trolley in the thread position, line
wires alignment device rises to the line wires to wire the
position,
the operator will the line wires corresponding to enter into the
line wires trolley The clip silk device, and the line wires to the
cross wires alignment device positioning board, finished, press the
automatic wire feeding button, line wires feeding trolley will be
the wire clamping, line wires alignment device reset, feeding
trolley step motor start, line wires feeding trolley drive line
wires to welding position, when the first cross line is welded, the
gripper is automatically loosened, the line wires feed
trolley is returned, and when the line wires is completely off the
line alignment device, the worker can begin to work on the line
wires of the next mesh piece.
Reinforcing Steel Bar Mesh Welding Machine Technical Parameters:
| Wire Diameter | 4-8mm |
| Max Mesh Width | 2500mm |
| Max Mesh Length | 6m or 12m |
| Cross wire spacing | 100-300 mm |
| Line wire spacing | 100-300 mm |
| Mesh Form Produced | in panel |
| Number of Line Wire | 24 |
| Welding Speed | max50-80 cross wires/min |
| Power | 160KVA*6( transformer with water cooling system ) |
| Pulling Mesh Way | pulling mesh back and forward repeatedly by Servo Motor |
| Rated voltage | 380V 50Hz Three Phase |
| Main Motor | 7.5KW (electromagnetic brake motor) |
| Welding Way | Resistance Welding Controlled by the Silicon |
| Pressure Mode | adjustable spring pressure |
| Welding Time | 10ms～100ms |
| Weft Wire Feeding way | step motor falling weft wire automatically |
| Machine weight | 7.5T |
| Machine dimension | 7.5x3.2*1.9m |
Reinforcing Steel Bar Mesh Welding Machine Applications:
Reinforcing steel bar mesh is mainly used in coal mine roadway,
concrete pavement, bridge deck, airport runway and construction
mesh.
Reinforcing Steel Bar Mesh Welding Machine Photos:
