Anping Dixun Wire Mesh Products Co., Ltd |
Verified Suppliers
|
|
Mesh Width 3000mm Pneumatic Reinforced Steel Bar Mesh Welding Production Line
Reinforced Steel Bar Mesh Welding Production Line Introduction:
The reinforced steel bar mesh welding production line is a
kind of automatic wire mesh welding equipment.
Line wire pre-cut automatic feeding, cross wire storage
automatic feeding, automatic mesh output,stacking alignment,
packaging.
Compared with the common wire mesh welding equipment, the automatic
wire mesh forming production line uses automatic feeding instead of
manual feeding, automatically turning the mesh, catching the mesh,
packing instead of manual lifting, placing and tying, which saves
the labor cost and improves the production efficiency.
Reinforced Steel Bar Mesh Welding Production Line Features:
1. High productivity. The Reinforced Steel Bar Mesh Welding
Production Line can make 40 tons at 12 hours.
2. The Reinforced Steel Bar Mesh Welding Production
Line is controlled by human-machine interface +PLC programming
controller, with high degree of automation.
3. Welding hot rolled ribbed wire, cold rolled ribbed wire, hot
rolled round bar, cold rolled round bar and other materials, wide
adaptability;
4. According to the user's capacity, the welding can be done in one
time or in several times, with great flexibility.
5. The Reinforced Steel Bar Mesh Welding Production Line is
designed as a separable structure, which is convenient for
specification adjustment and maintenance.
6. The transformer, silicon controlled upper and lower electrodes
and other welding systems adopt forced water cooling, and are
equipped with flow protection device. The unit can work
continuously and reliably.
7. Uniform welding pressure to ensure the quality of all solder
joints.
8. Unique lifting mechanism can lift off the electrode when the
mesh is dragged to ensure the service life of the electrode and
reduce the operation cost;
9. Transverse bar blanking device adopts stepping motor to feed
automatically, which can reduce labor intensity and improve
efficiency.
10. The cross wire is equipped with magnetic dumping
mechanism, which makes the dropping speed fast and the production
efficiency high.
11. The electrode is equipped with a placement device to ensure the
transverse reinforcement dropping is reliable and accurate;
Unique design ensures easy, flexible and quick replacement of rebar
and stencil specifications.
Reinforced Steel Bar Mesh Welding Production Line Advantages:
1. Each set of transformers is controlled by a separate
microcomputer, which can be pressed and divided to control welding
at one time. The welding points are uniform, firm, more stable,
faster and more intelligent.
2. The equipment adopts pneumatic welding pressure with uniform
pressure point and no welding burn.
3. The welding point of the equipment is made of high quality alloy
copper, which has a long service life and reduces the production
cost.
4. The transformer with enhanced design has a separate patent,
can meet the long time of welding, there is no open welding leakage
phenomenon.
5. Only two persons are needed to operate the whole
process to reduce labor cost.
Reinforced Steel Bar Mesh Welding Production Line Technical Parameters:
Model | DX-GWC-2000B | DX-GWC-2500B | DX-GWC-3000B |
Power supply | 220V,380V,415V,440V | 220V,380V,415V,440V | 220V,380V,415V,440V |
Air pump pressure | 0.6-0.8MPa | 0.6-0.8MPa | 0.6-0.8MPa |
Water cooling water pressure | 0.3MPa | 0.3MPa | 0.3MPa |
Welding mesh width | 2000mm | 2500mm | 3000mm |
Line wire space | 100-300mm | 100-300mm | 100-300mm |
Cross wire space | 100-300mm | 100-300mm | 100-300mm |
Welding electrodes | 20PCS | 24PCS | 30PCS |
Welding transformer | 200KVA*10PCS | 200KVA*12PCS | 200KVA*15PCS |
Line wire type | Pre-cut feeding by car | Pre-cut feeding by car | Pre-cut feeding by car |
Cross wire type | Pre-cut automatic feed | Pre-cut automatic feed | Pre-cut automatic feed |
Welding speed | 60-70 times per min | 60-70 times per min | 60-70 times per min |
Wire diameter | 5-12mm | 5-12mm | 5-12mm |
Falling mesh system | Automatic | Automatic | Automatic |
Capacity | 35-40 tons in 12 hours | 35-40 tons in 12 hours | 35-40 tons in 12 hours |
Reinforced Steel Bar Mesh Welding Production Line Applications:
Steel bar mesh has many uses, bridge building, highway construction, engineering construction, campus construction and hospital construction.
Reinforced Steel Bar Mesh Welding Production Line Packing:
Reinforced Steel Bar Mesh Welding Production Line Photos: