Spring Mitsubishi 12m Rebar Mesh Welding Machine

Mitsubishi PLC Water Cooling Electrode Reinforced Rebar Panel Mesh Welding Machine

Reinforced Rebar Panel Mesh Welding Machine Introduction:

The Reinforced Rebar Panel Mesh Welded Machine  is used to make steel rebar mesh, road mesh, building construction mesh. The Reinforced Rebar Panel Mesh Welded Machine  is featured by high capacity, easy operation, and precise control. The Reinforced Rebar Panel Mesh Welded Machine can weld wire diameter 5-9mm. The minmium mesh hole size 50*50mm. Maximum up to 300*300mm. Mesh width max 2500mm. This is a midium-sized machine to make steel rebar mesh. Have big market in different countries. Save cost for clients.

Reinforced Rebar Panel Mesh Welding Machine Features:

1. We are the leading manufacturer of wire mesh machines in China and we always offer ADVANCED WIRE MESH TECHNOLOGY.

2. Welding pressure is provided by spring pressure system, uniform pressure and stable performance; and the water-cooling transformer and water-cooling welding electrodes to make sure the welding firm during a long working time, and prolong the service life.

3. Cross wire feeding method: Firstly, the coil wires are straighten and cut into fixed length by straightening cutting machine, which become cross wire. Then worker put the cross wires into wire hopper. The cross wire hopper can load max 1500 tons rebar. Wire hopper under the control of air pump, the cross wires falling automatically one by one.

4. Line wire feeding method: Line wires are the same to cross wires, firstly use straightening cutting machine to straighten and cut coil wire into fixed length. Then workers put the line wire into the under electrodes. the welding began welding.

5. Control cabinet adopts PLC control system though touch screen operate system, you can change welding time, or welding current time. mesh opening size through touch screen.The electrical system from the international famous brand for precise control and smooth working.

6. The pulling mesh system is controlled by servo motor. Which is more the accurate of pull mesh than stepping motor. 

7. Cast water-cooling welding transformer, efficient cooling method, welding current can be adjusted by PLC.

Reinforced Rebar Panel Mesh Welding Machine Technical Parameters:

Reinforced Rebar Panel Mesh Welding Machine Applications:

Welded mesh panel widely used as reinforce mesh panel for building, construction; railway wire mesh fence, security fence and others.

Reinforced Rebar Panel Mesh Welding Machine Packing:

Reinforced Rebar Panel Mesh Welding Machine Photos: