|
[China]
Trade Verify
Address: 500 M North of Taicheng Industrial Area, Anping County,Hengshui City,Hebei Province.China.
Contact name:Jack Zhang
Anping Dixun Wire Mesh Products Co., Ltd |
|
Verified Suppliers
|
|
|
Mesh Width 2400mm Less Man Power Roof Construction Conforce Wire Making Machine
Conforce Wire Making Machine Introduction:
This conforce wire making machine can make 2.4-6mm mesh rolls. It is equipped wire pay-off, line wire straight setting device, control cabinet, mesh rolling machine. wire straightening and cutting machine. The wire straightening and cutting machine is used to make cross wire.
Conforce Wire Making Machine Features:
1.Our latest Conforce Wire Making Machine cent-control and welding time are composed of PLC program system . The input front-panel has two forms, touch screen and keyboard that makes the machine more intelligent and reasonable and it could press at one time, times welding .
2. The line wire is fed from coils; the cross wire is pre-cut, fed from hopper driven by step motor.
3. Mesh pulling system adopts servo motor back and forward to ensure the mesh opening accurately and can be adjusted freely within a certain range.pulls the mesh panel more accurately and intelligently.
4.At the same time, the conforce wire making machine is equipped with automatic rolling mesh machine, when the machine finishes the mesh length according to the setting parameters, the rolling mesh machine will rewind mesh automatically.
5. The automatic rolling mesh machine will rewind mesh automatically.The max up to 100m per roll. When the length of roll mesh reach the required mesh length, The rolling mesh machine will stop working.The worker take out the roll mesh.
6. The welding speed is fast and it is easy to learn and operate. Only two operators are enough.
7. Welding host, an alarm device that can improve the safety level and reduce the failure rate. The greatest degree of assurance of the equipment running smoothly.
Conforce Wire Making Machine Technical Parameters:
| Item | GWCD-1200D | GWCD-1600D | GWCD-2100D | GWCD-2500D |
| Number of Electrodes | 12 | 16 | 21 | 24 |
| Max. Mesh Width | 1200mm | 1600mm | 2100mm | 2500mm |
| Wire Diameter | 2.4-6mm | 2.4-6mm | 2.4-6mm | 2.4-6mm |
| Mesh Length | 15-100m per roll | 15-100m per roll | 15-100m per roll | 15-100m per roll |
| Cross Wire Space | 50-200mm | 50-200mm | 50-200mm | 50-200mm |
| Line Wire Space | 100-200mm | 100-200mm | 100-200mm | 100-200mm |
| Electric Capacity | ≥160KVA | ≥160KVA | ≥160KVA | ≥160KVA |
| Welding Speed | 45-65 times/min | 45-65 times/min | 45-65 times/min | 45-65 times/min |
| Control System | PLC Control | PLC Control | PLC Control | PLC Control |
| Special specification is available according to your requirements. | ||||
Conforce Wire Making Machine Applications:
The conforce wire is widely used, such as on both sides of the highway, on both sides of the railway, municipal wall, roof construction, airport wall, stadium wall and so on need to use barbed wire, so its use is very wide.
Conforce Wire Making Machine Packing:
Conforce Wire Making Machine Photos:
